Overview
The Pro Comp Suspension ES3000 318553 is a front hydraulic shock absorber for the 2006 Chevrolet Silverado 1500 in the LS and LT versions. It uses the factory upper and lower mounts, and its lengths are set to the vehicle. Pro Comp rates it for 0.5 to 2 in. of lift.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. It is designed for everyday highway use and for more demanding driving, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0.5 to 2 in. of lift
- Pro Comp Suspension limited lifetime warranty
Lift range and stock height
A 0.5 to 2 inch lift rating means this shock is meant for trucks close to stock height or with a small lift. A truck with a larger lift can load the shock at a steeper angle and reach full extension sooner, so the lift must be checked before installation. Measure the front ride height and compare it with the rating range.
Factory mounts keep the shock at the same points as the original, which makes the swap straightforward on an unmodified truck. Worn bushings, bent brackets and weak springs can change the way the shock works, so inspect them while the old unit is off. Chock the wheels, use stands before working under the truck, and recheck fasteners after the first few drives.
- Measure front ride height before ordering
- Inspect factory bushings and brackets
- Support the truck on stands during removal
- Recheck fasteners after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318553 |
| UPC | 614901695625 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0.5 to 2 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
This shock is a front unit for the 2006 Chevrolet Silverado 1500 in the LS and LT versions.
Other Silverado 1500 years and the Silverado 2500 and 3500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0.5 to 2 in. lift rating is the range Pro Comp designed for, so a truck with a larger lift should not use this part without a check. Because the mounts are factory, the shock replaces the original unit at the same points. Chock the wheels and use stands before working under the truck.
What’s included
One ES3000 shock.
Not included: the dust boot.












