Overview
The Pro Comp Suspension ES3000 317553 is a front hydraulic shock absorber for the 1994–2005 Dodge Ram 1500, the 1994–2002 Dodge Ram 2500 and the 1994–2001 Dodge Ram 3500. It mounts to the factory points on those trucks, so the length is matched to the vehicle rather than a set size. Pro Comp rates it for a 1.5 in. lift.
The ES3000 is a twin tube cellular gas design. Pro Comp says its 10-stage velocity-sensitive valving adjusts to changing road conditions, and that its 5/8 inch chrome-hardened piston rod and Teflon rebound stop help it handle hard driving. The shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts, so no conversion is needed
- Pro Comp Suspension limited lifetime warranty
Factory mount replacement
Factory mounts keep the shock in the same position the original used, so the suspension geometry stays close to what the truck was designed for. This makes a stock replacement straightforward, but the old mounting points should still be cleaned and inspected before the new shock goes in.
A 1.5 inch lift rating is a height the shock was designed around, so a truck with a different suspension height should be checked before fitting. A mismatched height can change how the shock extends and put extra strain on the factory mounts over time.
Worn factory bushings often feel like a loose shock even when the shock itself is sound. Replace worn bushings and check the bolts for corrosion. Keeping the mounts in good condition helps the shock control the suspension through its full range.
- Clean the mounting points before fitting
- Replace worn factory bushings
- Check bolts for corrosion
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 317553 |
| UPC | 614901040654 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 1.5 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1994–2005 Dodge Ram 1500 (Base, LT, Laramie, SLT, ST and WS), the 1994–2002 Dodge Ram 2500 (Base) and the 1994–2001 Dodge Ram 3500 (Base).
Other Ram generations, including the 2003 and later Ram 1500 and the 2003 and later Ram 2500 and 3500, and the Dakota are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mounts are factory, the shock is meant to replace the original unit at the same points. The 1.5 in. lift rating is the height Pro Comp designed for, so a truck with a different lift should be checked before fitting. Use jack stands and a safe lifting method when working under the truck.
What’s included
One ES3000 shock.
Not included: the dust boot.






