Overview
The Pro Comp Suspension ES3000 318509 is one hydraulic shock absorber from the ES3000 Series, sold individually. It has loop mounts at both ends, an 18.59 in extended length, an 11.70 in collapsed length and 5.89 in of travel.
The ES3000 is a twin tube cellular gas design. Its 10-stage velocity-sensitive valving adjusts damping to road conditions, and the 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for comfortable highway driving and demanding conditions. Double welded shock mounts and the Pro Comp Suspension limited lifetime warranty complete the package.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Sold individually
- Pro Comp Suspension limited lifetime warranty
Working with single shocks
Because one shock is sold at a time, plan the order before you start. Replace the unit on the same side as the old one, and check that both shocks on an axle are the same type so the ride stays balanced. Mixing a fresh shock with an old one can make the vehicle pull or sway on turns, even when each part is good on its own.
Before installing, compare the body, rod and mounts of the new shock with the old unit. Loop eyes should line up without forcing, and the rod should move smoothly through its full range by hand. Because the dust boot is not included, reuse the old boot only if it is undamaged. Torque the mounting bolts after the first few miles and recheck them after rough trails.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318509 |
| UPC | 614901040753 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 18.59 in |
| Collapsed length | 11.70 in |
| Travel length | 5.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
Match the 18.59 in extended length, 11.70 in collapsed length and loop mounts to the shock on your vehicle. Confirm the year, model and trim of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock absorber. The shock is sold individually, so a pair takes two units.
Not included: the dust boot.





















