Overview
The Smittybilt Oversized Tire Carrier, part 2743, mounts an oversized tire to the 2007-2010 Jeep Wrangler JK. It attaches to the factory tailgate using the existing holes, so no drilling or modifications are required.
The carrier is adjustable and is designed for a tire up to 37 inches and up to 195 lbs. The adjustable arm removes tailgate sag, and the carrier and tailgate open and close as a single unit.
Key features
- Mounts to the factory tailgate using the existing holes
- No drilling or modifications required
- Completely adjustable mount
- Adjustable arm eliminates tailgate sag
- Carrier and tailgate open and close as one unit
- Signature Series matte black textured finish
Tailgate loads and tire care
A tire carried on a tailgate adds leverage to the hinges and latch, and the tailgate itself flexes more than a fixed rear swing arm would. An adjustable arm that removes sag helps keep the tailgate level, but the factory hinges and striker still carry the load, so inspect them periodically for wear and cracking around the mounting points.
Mount the tire with the sidewall facing outward and check the pressure before each trip, since a heavy tire can shift under bumps. Tighten the carrier fasteners after the first few drives, and recheck them after rough trails. Carry the tire in a cover to keep mud and road grime off the rim and the carrier’s contact points.
Spare tire weight changes how the vehicle handles, so keep the load centered and avoid overloading the carrier. Check the spare’s condition as well, looking for dry rot and uneven wear before it is needed on the road.
- Check hinges and striker for cracks
- Tighten fasteners after the first drives
- Keep the load centered
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2743 |
| UPC | 631410090116 |
| Type | Oversized tire carrier |
| Maximum tire size | 37 inches |
| Load capacity | 195 lbs |
| Mounting | Factory tailgate, existing holes, no drilling |
| Mount location | Body mount |
| Finish | Matte black textured |
Vehicle fitment
It fits the 2007-2010 Jeep Wrangler JK. Confirm the year, model and trim of your vehicle before ordering.
It fits 2007-2010 JK models.
Installation notes
The carrier attaches to the factory tailgate through the existing holes, so no drilling is needed. Check that the tailgate holes match the carrier before you start.
What’s included
The carrier is sold as the mounting unit for the tailgate. Tires are not included.






























