Overview
The Rugged Ridge 11546.61 is the Spartacus HD tire carrier hinge casting, a replacement hinge for the tailgate of the 1997–2006 Jeep Wrangler TJ and the 2004–2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon. It replaces the stock tailgate hinges with a die-cast aluminum casting, forged steel hinges and hardened steel pins for greater load-bearing capacity.
The casting carries up to a 35 inch tire and wheel combination without the extra weight of steel bumper-mounted carriers, and it keeps smooth, one-handed access to the cargo area. It can be used alone with the factory spare tire mount, or combined with the Rugged Ridge HD Wheel Mount (11546.62), a separate part. The casting is protected with a durable black textured powder coat.
Key features
- Die-cast aluminum hinge casting for strength without the excess weight of steel.
- Forged steel hinges and hardened steel pins for load-bearing capacity.
- Carries up to a 35 inch tire and wheel combination.
- Replaces the stock tailgate hinges while keeping one-handed cargo access.
- Compatible with OE and most aftermarket rear bumpers.
- No drilling required.
- Patent-pending design.
- Durable black textured powder coat finish.
Pairing a hinge casting
Replacing the stock tailgate hinges changes how the tailgate carries weight, so the casting, pins and bumper mount work as one system. Inspect the hinge pins at regular intervals and look for wear where the casting meets the body. A loose hinge can shift the spare and make the tailgate hard to open.
If you add a wheel mount later, plan the setup as a whole. Heavier spare tires increase load on the bumper, so confirm the bumper and mounting hardware can handle the added weight before installing. Keep an eye on the powder coat too, since chips can let corrosion start on the aluminum. Touch up small chips and keep the finish clean. Tailgate alignment should be checked after installation and again after any rough trip.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11546.61 |
| UPC | 804314292492 |
| Product type | Spartacus HD tire carrier hinge casting |
| Casting | Die-cast aluminum |
| Hinges | Forged steel |
| Pins | Hardened steel |
| Tire and wheel capacity | Up to a 35 inch combination |
| Finish | Durable black textured powder coat |
| Mount location | Bumper mount |
| Patent | Patent pending |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. It also covers 97-06 Jeep Wrangler TJ, Rubicon and Unlimited models.
Fitment covers the TJ and LJ generations. Verify your year, model and trim first.
Installation notes
The casting is a bumper mount part and needs no drilling. It works with OE and most aftermarket rear bumpers. If you add the HD Wheel Mount (11546.62), install it as a separate part and follow its own instructions. Because the casting carries a heavy spare on the tailgate, check the hinge pins and mounting hardware periodically.
What’s included
This item is the hinge casting only. Check the parts in the box against your installation before starting.
Not included: the HD Wheel Mount (11546.62), a separate companion part, and the tire and wheel.






















