Overview
The TeraFlex 4838150 is a heavy-duty hinged tire carrier and tailgate reinforcement kit for Jeep vehicles, built to carry a spare tire up to 37 inch. It mounts to the factory tailgate hinge points, so the spare tire and tailgate load is spread across more than one hinge rather than concentrated at a single point.
The main component is cast A356.2 T6 aluminum, chosen to keep the carrier light while still strong. Forged steel hinge brackets and cold formed, high-carbon hardened steel hinge pins complete the hinge hardware. The carrier is shaped to follow the contour of the Jeep body, and the factory tub’s internal gussets and bracing support it with an oversized tire.
Key features
- Holds a spare tire up to 37 inch
- One-action access to the rear cargo area.
- Uses the factory tailgate hinge mounting points to spread the load
- Makes the carrier the load-carrying component, which TeraFlex says takes stress off the tailgate
- Threaded mounting holes for fuel cans, a recovery jack and similar accessories
- Works with OE and aftermarket bumpers
- Cast aluminum main component with forged steel hinge brackets
Tailgate and tub support
A tire carrier kit that uses factory hinge points depends on the strength of the surrounding tailgate and tub. Look at the tub for solid mounting areas and check that the gate opens and closes smoothly before adding a spare. Reinforcement helps only when the existing structure is sound, so inspect for rust or cracks first.
Carrying an oversized tire increases the leverage on the hinge points and the tailgate. Keep the spare as close to the body as the kit allows, and use a helper for lifting. Periodic checks of the hinge pins, bolts and gate latch keep the setup safe, especially after rough trails.
- Inspect the tub for rust before mounting
- Use a helper when lifting the tire
- Check hinge pins periodically
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4838150 |
| UPC | 843885031147 |
| Maximum tire size | 37 inch |
| Main component | Cast A356.2 T6 aluminum |
| Hinge brackets | Forged steel |
| Hinge pins | Cold formed high-carbon hardened steel |
| Mounting | Factory tailgate hinge mounting points |
| Drilling | Not required |
| Vehicle type | Jeep, 2- and 4-door models |
Vehicle fitment
It is designed for 2- and 4-door Jeep models with the factory tailgate and tub. Check your Jeep’s model years and trim against this before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TeraFlex describes installation as possible with common hand tools and says no drilling is required. The carrier uses the factory tailgate hinge points, so those hinges carry the load. A spare tire is heavy, so have a helper or lifting equipment handle the tire rather than lifting it alone.
What’s included
The kit includes the carrier and its hinge hardware.
Not included: The spare tire and wheel. A third brake light extension mounting kit, part number TER4997220, is a separate item and is not part of this carrier.




































