Overview
The Rock Hard 4×4 Parts RH-7050 is a Patriot Series rear bumper with tire carrier for the 1999–2004 Jeep Grand Cherokee (WJ). It combines a rear bumper with a swing-out tire carrier that holds a tire up to 38 inch, an integrated class 2 hitch receiver and an integrated Hi-Lift jack mount, so one unit handles towing and spare tire carrying.
The bumper is built from 3/16 inch x 2 inch x 4 inch thick metal tubing with 1/4 inch plate ends and finished in black powder coat. It has a dual stage latch and rattle free operation. It is made in the USA with a lifetime warranty, and all necessary hardware is provided for installation.
Key features
- Integrated class 2 hitch receiver.
- Swing-out tire carrier that holds up to a 38 inch tire.
- Integrated Hi-Lift jack mount with horizontal mount and padlock provision.
- Two 5/8 inch x 1/2 inch CNC machined D-ring shackle mounts with welded tabs.
- CB antenna mount.
- Dual stage latch and rattle free operation.
- Black powder coat finish.
- 3/16 inch x 2 inch x 4 inch thick metal tubing with 1/4 inch plate ends.
Towing with a bumper receiver
A hitch receiver built into a rear bumper puts the towing load on the bumper mounting and the frame, so the attachment matters as much as the receiver size. Before towing, confirm the rating for your vehicle and trailer, and use a hitch pin and clip that fit the receiver. Keep the load level, with tongue weight within what the vehicle allows.
A carrier mounted on the same bumper adds weight and leverage to the same structure. When a spare is mounted, the combined load on the latch and mounts increases, so check the latch, bolts and welds after rough use. Keep the receiver clean and free of rust so the pin slides in easily.
- Inspect the latch before each trip
- Tighten bolts and check welds after rough trails
- Use a correctly rated hitch pin and clip
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-7050 |
| UPC | 70000774093 |
| Series | Patriot Series |
| Mount location | Bumper mount |
| Tubing | 3/16 inch x 2 inch x 4 inch thick metal tubing |
| Plate ends | 1/4 inch |
| Tire capacity | Up to 38 inch tire |
| Hitch receiver | Integrated class 2 |
| Jack mount | Integrated Hi-Lift, horizontal, with padlock provision |
| D-ring shackle mounts | Two, 5/8 inch x 1/2 inch CNC machined, welded tabs |
| Latch | Dual stage |
| Finish | Black powder coat |
| Warranty | Lifetime warranty |
| Made in | USA |
Vehicle fitment
It fits the 1999–2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims.
Earlier Grand Cherokee (ZJ) and Wrangler models fall outside this fitment. Check your year, model and trim before ordering.
Installation notes
All necessary hardware is provided for installation. Confirm the receiver’s towing limits for your vehicle before towing with it. With a spare tire of up to 38 inch mounted at the rear, check the carrier’s latch and bolts after the first drives.
What’s included
The bumper includes the integrated class 2 hitch receiver, the integrated Hi-Lift jack mount, the CB antenna mount, the two D-ring shackle mounts and all necessary hardware for installation.
Not included: the spare tire and wheel and the Hi-Lift jack itself.














