Pro Comp Suspension
Showing 1441–1488 of 2109 resultsSorted by popularity
-
-
Shock Absorbers
Pro Comp ES6000 Series Strut – 622053
- Pro Comp ES6000 Series gas charged strut, part number 622053
- Expanded twin tube design increases fluid capacity up to 50%
- Double welded shock mounts; factory upper and lower mounts
- Requires the OEM coil spring; white finish, sold as each
SKU: EXP622053 -
-
Suspension Block and U-Bolt Kit
Pro Comp 1.5 Inch Rear Lift Block with U-Bolt Kit – 62201
- Pro Comp Suspension 1.5 inch rear lift block kit with U-bolts, part number 62201
- Two rear lift blocks, four U-bolts, eight thick flat washers and eight U-bolt nuts
- Confirm fit for your vehicle before ordering.
SKU: EXP62201 -
-
-
-
-
-
-
-
-
-
Shock Absorbers
Pro Comp ES6000 Series Strut – 618053
- Pro Comp ES6000 gas-charged front strut, part number 618053, requires an OEM coil spring
- Fits 1996 to 1998 Toyota 4Runner and 1998 to 2004 Toyota Tacoma
- Lift rating 0 to 2 in.; factory upper and lower mounts
- Double-welded mounts and an expanded twin-tube design
SKU: EXP618053 -
Shock Absorbers
Pro Comp ES6000 Series Strut – 614500
- Pro Comp ES6000 gas-charged front strut, part number 614500, requires an OEM coil spring
- Fits 2002 to 2007 Jeep Liberty
- Twin-tube design with an expanded fluid capacity of up to 50 percent, per Pro Comp
- Rated by Pro Comp for 0 in. lift or drop; factory upper and lower mounts
SKU: EXP614500 -
-
Suspension Block and U-Bolt Kit
Pro Comp 1 Inch Rear Lift Block with U-Bolt Kit – 61251
- Pro Comp Suspension 1 inch rear lift block kit with U-bolts, part number 61251
- Two rear lift blocks, four U-bolts, eight thick flat washers and eight U-bolt nuts
- Compare your rear springs with this kit before buying.
SKU: EXP61251 -
-
-
Suspension Leveling Kits
Pro Comp Nitro 2.5 Inch Leveling Lift Kit – 61180K
- Pro Comp Nitro 2.5-inch leveling lift kit, part number 61180K
- Front strut spacers and rear coil spring spacers
- Lift height of 2.5 inches front and 1 inch rear
- Bump stop extensions, hardware and instructions included
- Maximum tire size 35 inches; not for the 2013 or 2015 Ram 1500 or the TRX4
SKU: EXP61180K -
Suspension Leveling Kits
Pro Comp Nitro 2.5 Inch Leveling Lift Kit – 61180
- Pro Comp Nitro 2.5-inch leveling lift kit, part number 61180
- Front strut spacers, steel, black finish
- Fits 2006 to 2010 and 2011 to 2019 Ram 1500 4WD trucks
- Maximum lift 2 inches; 35-inch tire clearance, with fender modification possible on 35×12.50 tires
- Not for air bag equipped models, Rebel or TRX4
SKU: EXP61180 -
Suspension Leveling Kits
Pro Comp 2 Inch Leveling Lift Kit – 61151
- Pro Comp 2-inch leveling lift kit, part number 61151
- Fits the 2002 to 2005 Dodge Ram 1500 in Laramie, SLT and ST trims
- Front lift with two torsion keys and a hardware kit
- Maximum tire size 35 inches
- Front shock matched to this kit
SKU: EXP61151 -
-
-
-
Suspension Block and U-Bolt Kit
Pro Comp 5.5 Inch Rear Lift Block with U-Bolt Kit – 58554
- Pro Comp Suspension 5.5 inch rear lift block with U-bolt kit, part number 58554
- Cast iron riser blocks with four U-bolts
- Eight heavy duty flat washers and eight hi-nuts included
- Confirm fit before buying.
SKU: EXP58554 -
-
Suspension Block and U-Bolt Kit
Pro Comp 5.5 Inch Rear Lift Block with U-Bolt Kit – 58551
- Pro Comp Suspension 5.5 inch rear lift block with U-bolt kit, part number 58551
- Two cast iron riser blocks, four U-bolts, eight washers and eight hi-nuts
- Tapered blocks for driveshaft angles
- Match the kit to your axle and spring pack before purchase.
SKU: EXP58551 -
-
-
Suspension Block and U-Bolt Kit
Pro Comp 4 Inch Rear Lift Block with U-Bolt Kit – 58404
- Pro Comp Suspension 4 inch rear lift block with U-bolt kit, part number 58404
- Cast iron riser blocks, two per kit
- Four U-bolts with flat washers and hi-nuts
- Fit is set by the vehicle, so confirm it before buying.
SKU: EXP58404 -
Suspension Block and U-Bolt Kit
Pro Comp 4 Inch Rear Lift Block with U-Bolt Kit – 58402
- Pro Comp Suspension 4 inch rear lift block with U-bolt kit, part number 58402
- Two tapered cast iron riser blocks with four U-bolts
- Includes eight heavy duty flat washers and eight hi-nuts
- Fit depends on your own vehicle.
SKU: EXP58402 -
Suspension Block and U-Bolt Kit
Pro Comp 4 Inch Rear Lift Block with U-Bolt Kit – 58401
- Pro Comp Suspension 4 inch rear lift block with U-bolt kit, part number 58401
- Two tapered cast iron riser blocks, four U-bolts and matching hardware
- Tapered design for driveshaft angles
- Verify the rear axle and spring pack fit your vehicle before purchase.
SKU: EXP58401 -
-
-
-
Suspension Block and U-Bolt Kit
Pro Comp 2.5 Inch Rear Block With U-Bolt Kit – 58255
- Pro Comp Suspension 2.5 inch rear block kit with U-bolts, part number 58255
- Tapered lift blocks intended to help keep driveshaft angles
- Provides rear lift on a leaf spring equipped vehicle
- Fit depends on your leaf spring setup.
SKU: EXP58255
