Overview
The Pro Comp 61240 is a 2-inch leveling lift kit with steel front coil spring spacers, sold with a hardware kit. It lifts the front only. The maximum tire size is 35 inches, and the finish is black.
It fits selected Dodge Ram 1500, 2500 and 3500 model years, along with the 2011 and 2012 Ram 2500 and 3500. It does not change factory ride quality or comfort.
Key features
- 2-inch front lift
- Steel coil spring spacers
- Hardware kit included
- Black finish
- Front lift only
- Maximum tire size of 35 inches
Coil spacers and ride height
Coil spring spacers sit on top of the factory coil and raise the body of the truck without changing the spring rate. The spring itself still carries the load, so a heavier front end will compress the springs further over time. Pay attention to the coil seat and the upper isolator, since a worn isolator can make the new height look uneven.
When choosing a coil spacer setup, consider what the front will carry. Bumpers, winches and heavy loads add weight that can settle the height. Front shock length and brake hose slack also matter once the front rises, and a front alignment after installation keeps tire wear even.
- Check the coil seat and upper isolator
- Measure front height on both sides
- Check shock extension at the new height
- Inspect brake hose slack after the lift
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 61240 |
| UPC | 614901022230 |
| Type | Leveling lift kit, coil spring spacer |
| Lift height | 2 inches |
| Front lift method | Coil spring spacers |
| Spacer material | Steel |
| Finish | Black |
| Maximum tire size | 35 inches |
Vehicle fitment
It fits the 1994 to 2001 and 2006 to 2008 Dodge Ram 1500 in Base, LT, Laramie, SLT, ST, SXT and Sport trims. It also fits the 1994 to 2010 Dodge Ram 2500 and 3500, and the 2011 to 2012 Ram 2500 and 3500.
Trucks from 2002 to 2005 and the 2009 to 2010 Ram 1500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









