Overview
The Pro Comp Suspension rear block kit, part number 58409, is a 4-inch rear lift block kit for 4WD applications. A suspension block of this type is installed between the axle and the leaf or coil spring seat to raise the rear of the vehicle.
This kit is a 4-inch rear block for 4WD vehicles. Confirm it suits your rear suspension, spring type and mounting points before installing it.
Key features
- 4-inch rear lift
- Designed for 4WD applications
Ride height and driveline geometry
Raising the rear of a vehicle changes the relationship between the axle and the driveshaft. As the axle rotates to a new angle, the driveshaft joints work harder, and vibration can increase if the angle is too steep. Checking the geometry after installation is the simplest way to find problems early.
Before choosing a rear block, look at how the lift will work with the rest of the suspension. Shocks, brake lines and the emergency brake cable may need length adjustments, and extended shocks or longer straps are often replaced at the same time. Test the vehicle on a short drive, then recheck the driveline angles and look for rubbing at the tires.
- Inspect the u-joints for play after the first drive
- Check brake lines and cables for stretch
- Recheck bolt tightness after the first few trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 58409 |
| UPC | 614901230116 |
| Lift | 4 inches (rear) |
| Drivetrain | 4WD |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the block against your rear axle and spring seat.
Installation notes
A rear lift block changes the axle angle, so check the driveline angles after installing it. Have the bolts and any spring-seat hardware you need ready before starting.
What’s included
Check the package contents against your installation before starting.






