Select your vehicle

Pro Comp ES6000 Series Strut – 622053

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES6000 Series gas charged strut, part number 622053
  • Expanded twin tube design increases fluid capacity up to 50%
  • Double welded shock mounts; factory upper and lower mounts
  • Requires the OEM coil spring; white finish, sold as each

Description

Overview

The Pro Comp 622053 is an ES6000 Series gas charged strut designed for a smooth, comfortable ride on the road and better handling off road. Its expanded twin tube design increases fluid capacity by up to 50 percent.

The strut uses double welded shock mounts for maximum strength and durability. It is built to use the vehicle’s original coil spring, so the OEM coil spring is required and is not supplied with the strut.

It is suitable for street and trail use. The upper and lower mounts are factory mounts, and the lengths are vehicle specific.

Key features

  • Gas charged strut design
  • Expanded twin tube with up to 50 percent more fluid capacity
  • Double welded shock mounts
  • Factory upper and lower mounts
  • Requires OEM coil spring

Strut vs. shock: what changes

A strut is a structural part of the suspension, not just a damper. It carries the spring, locates the wheel and often serves as a steering pivot, so a failed strut affects alignment and handling in ways a plain shock does not. Because the strut is part of the upper mount, its bearing and mount condition matter as much as the damping inside it.

When replacing a strut, consider the spring it works with and the alignment afterward. Reusing a worn spring can leave the new strut overloaded and the ride height uneven. Plan an alignment check after any strut change, since camber and toe can shift as the new unit settles.

  • Check the coil spring condition
  • Plan an alignment check afterward
  • Inspect the upper mount bearing

Specifications

Brand Pro Comp Suspension
Part number 622053
UPC 614901114706
Shock series ES6000 Strut
Extended length Vehicle specific
Collapsed length Vehicle specific
Travel length Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot Not included
Sold as Each

Vehicle fitment

Confirm the strut’s extended length, collapsed length and travel against your vehicle, and confirm it works with the OEM coil spring, before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES6000 Series gas charged strut. The OEM coil spring is required and is not included.

SKU: EXP622053 Category:

Specification

Shipping weight 7.25 lbs
Package dimensions 24.00 × 6.00 × 6.00 in
brands

Questions & Answers

Does the 622053 need a coil spring?

Yes. It requires the OEM coil spring, which is not included with the strut. The original spring has to be in serviceable condition for the strut to be used.

How much fluid capacity does the 622053 have?

The expanded twin tube design increases fluid capacity by up to 50 percent, which supports a smooth ride on the road.

Are the mounts on the 622053 factory mounts?

Yes. The upper and lower mounts are factory mounts, and the strut has double welded shock mounts for maximum strength and durability.

When should struts be replaced in pairs?

Replace struts in pairs on the same axle so damping and ride height match side to side. Check for leaks, a clunking noise over bumps, and uneven tire wear. Worn strut mounts and bearings often go bad at the same time, so inspect them when the strut is out.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon