Select your vehicle
-13%

Pro Comp 2 Inch Leveling Lift Kit – 61220

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 2-inch leveling lift kit, part number 61220
  • Fits the 2005 to 2010 Dodge Dakota
  • Front strut spacers with hardware kit, black finish
  • Front lift only; maximum tire size listed at 33 inches

Description

Overview

The Pro Comp 61220 is a 2-inch leveling lift kit for the 2005 to 2010 Dodge Dakota. It uses two steel strut spacers to lift the front only, bringing the front of the truck level with the rear. A hardware kit is included. The maximum tire size is 33 inches, and the kit provides room for wheels and tires up to 35 inches in diameter.

The kit keeps factory ride quality and comfort unchanged. It carries a lifetime warranty for as long as the owner keeps the vehicle. It is a direct fit for the Dakota trims named in the vehicle fitment section.

Key features

  • 2-inch front lift
  • Two steel strut spacers
  • Hardware kit included
  • Black finish
  • Front lift only
  • Maximum tire size of 33 inches listed

Before you install strut spacers

Strut spacers sit between the strut and its upper mount, so raising the front changes the geometry that the suspension was built around. Caster and camber move as the front rises, which is why a front alignment is normally part of finishing a lift like this one. Worn ball joints, tie rod ends and sway bar end links are easier to replace while the front is apart than after a lift has already loaded them.

Upper strut mount bolts and the brake hose length deserve a look during installation. After the first few drives, recheck the mount bolts and listen for new clunks over bumps. Steering that feels off-center or tires wearing on one edge usually point to alignment or a worn component rather than to the spacers themselves.

  • Schedule a front alignment after the lift
  • Inspect ball joints and tie rod ends first
  • Check brake hose length at full steering lock
  • Recheck strut mount bolts after the first drives

Specifications

Brand Pro Comp Suspension
Part number 61220
UPC 614901022537
Type Leveling lift kit, strut spacer
Lift height 2 inches
Front lift method Strut spacers
Spacer material Steel
Finish Black
Maximum tire size 33 inches

Vehicle fitment

It fits the 2005 to 2010 Dodge Dakota in Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport and TRX trims. The Ram 1500 and other trucks are not covered by this kit.

Ram 1500 and other trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.

SKU: EXP61220 Category:

Specification

Shipping weight 4.45 lbs
Package dimensions 13.60 × 6.60 × 3.40 in
brands

Fitment

VehicleYearsTrims
Dodge Dakota2005–2010Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 61220 fit a 2008 Dodge Dakota?

Yes. It fits 2008 Dodge Dakota models in the Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport and TRX trims.

Does the 61220 lift the rear?

No. It is a front lift only, using two steel strut spacers and a hardware kit included in the box.

What is the maximum tire size for the 61220?

The maximum tire size is 33 inches. The kit also provides clearance for wheels and tires up to 35 inches in diameter.

Do strut spacers affect alignment?

Yes. Raising the front changes caster and camber, so a front alignment is usually needed after installation. Replacing worn ball joints and tie rod ends at the same time helps keep the new ride height steady and tire wear even.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon