Overview
The Pro Comp 58555 is a 5.5-inch rear lift block kit with U-bolts, made for rear leaf spring suspensions. The Super Duty trucks are the listed applications, from 1999 to 2010 for the F-250 and F-350 models.
Pro Comp’s lift block kits use tapered blocks, which Pro Comp says improve and retain driveshaft angles while the rear end is raised. The blocks are the kit’s main component and are used to achieve the rear lift on a leaf spring truck.
Key features
- 5.5-inch rear lift
- Tapered lift blocks for driveshaft angle
- U-bolt kit included
- Designed for leaf spring suspensions
Driveshaft angles after a rear lift
Raising the rear of a leaf spring truck changes the angle of the driveshaft and the pinion. Angles that are too steep can cause vibration, wear on the U-joints and a shudder under acceleration. Tapered blocks are designed to keep the angles closer to the factory relationship, but the result still depends on the driveshaft length, the transfer case height and how far the axle has been moved.
Rear lift blocks also change the way the axle sits under load, so the U-bolts and spring seats deserve regular checks. Look for loose nuts, shifting spring positions and any sign of wear at the seats. Long highway drives can loosen fasteners, so inspect the rear end after the first few trips with the new height.
- Check U-joints for play after installation
- Listen for vibration at highway speeds
- Inspect brake lines for stretch at the new height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 58555 |
| UPC | 614901209556 |
| Position | Rear |
| Lift | 5.5 inch |
| Block design | Tapered |
| Kit contents | Block with U-bolt kit |
Vehicle fitment
The kit fits 1999 to 2010 Ford F-250 Super Duty and F-350 Super Duty models, including the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT versions.
Confirm fit for your vehicle’s year, model and trim before ordering, especially outside the 1999 to 2010 Super Duty range.
Installation notes
A 5.5-inch rear block changes pinion and driveline angles, so check the driveshaft angles after installation. Confirm the U-bolts and spring seats fit your rear axle before tightening.
What’s included
One rear block with a U-bolt kit.







