Overview
The Pro Comp 62170 is a 2.25-inch front leveling lift kit that raises the front of the vehicle to match the rear. It fits 2007–2012 Ford Edge and 1998–2011 Ford Ranger models.
The kit uses two torsion keys for the front lift and includes a hardware kit. It gives clearance for wheels and tires up to 33 inches in diameter.
The kit does not change factory ride quality or comfort. It carries a lifetime warranty against defects for as long as the owner keeps the vehicle.
Key features
- 2.25-inch lift at the front
- Two torsion keys
- Hardware kit included
- Front lift only; the rear is not lifted
- Maximum tire size 33 inches
Before you buy
A front leveling kit brings the front ride height up to the rear without touching the rear suspension. The rear keeps its factory geometry, but the front wheel angles change, so steering and braking feel should be checked after the first drive. Torsion keys set the height by turning the adjusters on the torsion bars, which allows the setting to be tuned in small steps.
Compare the wheel and tire diameter you plan to run with the clearance this kit provides. Larger tires add load to the front hubs and can change speedometer readings. Check that the tire clears the fenders and steering components at full lock before committing to a size.
After installation, inspect the torsion bar adjusters and bolts for movement during the first few trail runs, and recheck the alignment after any height change. Worn ball joints and tie rod ends should be replaced before a lift goes in, because the added height puts more load on them.
- Inspect torsion bar adjusters for movement after the first drives
- Recheck alignment after any height adjustment
- Replace worn ball joints and tie rod ends before installing
- Confirm fender and steering clearance at full lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62170 |
| UPC | 614901022339 |
| Lift height | 2.25 inches |
| Front lift method | Torsion keys |
| Rear lift | None, front lift only |
| Position | Front |
| Spacer material | Steel |
| Finish | Unfinished |
| Maximum tire size | 33 inches |
| Warranty | Lifetime, for as long as you own the vehicle |
Vehicle fitment
It fits the 2007–2012 Ford Edge and the 1998–2011 Ford Ranger.
Other Ford model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion keys set the front height by turning the keys on the torsion bars. After setting the height, check the front end alignment.
What’s included
Two torsion keys and a hardware kit.









