Overview
The Pro Comp Alignment Eccentrics and Cams, part number 594, are front camber and caster cams for the 1987–1994 Ford F-150 and the 1988–1994 Ford Ranger. They are installed to help correct camber and caster after a lift.
Camber is the inward or outward tilt of the top of the wheel, and caster is the forward or backward tilt of the steering axis. Both shift when a truck is raised, which can cause uneven tire wear and steering that pulls or wanders. Eccentric cams are offset bushings that let an alignment shop move those angles back into range.
Key features
- Designed to help correct camber and caster after a lift
- Installed in the front suspension
- Front position
- Direct fit
Alignment after a lift
Camber is the tilt of the wheel top inward or outward, and caster is the tilt of the steering axis forward or backward. A lift moves both, and the change often shows up as uneven inner or outer tire wear and a truck that wanders on the highway. Eccentric cams give the alignment shop a way to bring those angles closer to range, but they only work within their adjustment and cannot fix worn parts.
Before installing cams, inspect ball joints, tie rod ends, control arm bushings and wheel bearings. Play in any of these will keep the alignment from holding, even with the cams in place. After installation, have the alignment checked and ask for the readings, then recheck after a few weeks of driving, since tires and new bushings settle. Watch the tires for uneven wear as an ongoing check.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 594 |
| UPC | 614901111996 |
| Position | Front |
| Type | Alignment eccentrics and cams |
| Corrects | Camber and caster |
| Fitment type | Direct fit |
Vehicle fitment
Pro Comp lists these cams for the 1987–1994 Ford F-150 across the trims in its fitment data, and for the 1988–1994 Ford Ranger in the same way.
Other years of the F-150 and Ranger, the Ford F-250 and the Ford Excursion are not in the fitment data. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have camber and caster checked with an alignment after the cams are installed, since a lift changes both angles and the cams only correct them within their range.








