Overview
The 620500 is an ES6000 gas charged strut. It gives a smooth, comfortable ride on the road and better handling off road. The expanded twin tube design increases fluid capacity by up to 50 percent, and the double welded mounts add strength. The strut requires the OEM coil spring. It fits the 2002 Jeep Wrangler TJ in SE, Sahara, Sport and X trims.
Key features
- Gas charged strut
- Expanded twin tube design
- Fluid capacity up to 50 percent higher
- Double welded mounts
Strut service and coil springs
A strut combines the damper and the spring mount into one assembly, so its condition affects steering geometry as well as ride. When the damping fades, the vehicle can wander on the highway and the tires may wear unevenly. The strut is also a load-carrying part, so it should be inspected whenever the front end is serviced.
The coil spring is the part that holds the vehicle’s height, and it is often reused when a strut is replaced. Look for sagging, cracked coils or a height loss on one side before installing the strut. A spring that has settled may need replacing with a matching unit so the new strut is not overloaded.
Upper strut mounts and bearings wear over time and can cause clunks when turning. Replacing them during a strut job keeps the assembly tight. After installation, have the front alignment checked, since a new strut changes the geometry.
- Inspect the coil spring for sag
- Check for cracks in the coils
- Replace upper mounts and bearings if worn
- Get the front alignment checked
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 620500 |
| UPC | 614901203271 |
| Shock series | ES6000 strut |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
| Boot included | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2002 Jeep Wrangler (TJ) in SE, Sahara, Sport and X trims.
Other Wrangler years and generations are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strut requires the factory coil spring, so the stock spring should be kept or replaced with one that matches the strut. Check the strut’s length against the factory strut before installation.
What’s included
- One ES6000 gas charged strut
Not included: the OEM coil spring, which is required for installation.









