Overview
The Pro Comp 58255 is a 2.5 inch rear block kit from Pro Comp Suspension. The kit is used to gain rear lift on a leaf spring equipped vehicle, which is the job the block kit is sold for.
Tapered lift blocks are intended to help improve and retain driveshaft angles. Measure your rear axle and leaf spring pack before ordering.
Key features
- 2.5 inch rear lift
- Tapered lift blocks for driveshaft angles
- Designed for leaf spring suspensions
Leaf spring rear lift basics
A leaf spring rear relies on the spring pack to locate the axle, so a block lift raises the axle along the existing leaves. This is different from coil spring setups, where height changes are made at the spring itself. Knowing your suspension type helps you pick the right kit and avoid mounting parts that do not match.
Once raised, the axle changes the position of brake lines, shocks, and driveshaft joints. Check each of these after installation and before highway use. Re-tighten the U-bolts after the first drives, and keep an eye on the tires and fenders for rubbing under load and at full compression.
- Confirm the rear suspension is leaf sprung
- Check shock extension after lifting
- Measure brake line reach
- Re-tighten U-bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 58255 |
| UPC | 614901209532 |
| Type | Rear block kit with U-bolts |
| Lift height | 2.5 in |
| Block shape | Tapered |
Vehicle fitment
Fit depends on your leaf spring pack and rear axle, so measure both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.







