Overview
The Pro Comp Nitro 61180 is a leveling lift kit with steel front strut spacers. It fits 4WD Ram 1500 trucks from 2006 to 2019 and provides up to 2 inches of maximum lift. It is for 4WD trucks only, and only the trucks covered in the fitment section below.
The kit lifts the front only and gives clearance for tires up to 35 inches in diameter. A minor fender modification may be needed for 35×12.50 tires.
Key features
- Maximum lift of 2 inches
- Steel front strut spacers
- Black finish
- Front lift only
- Tire clearance up to 35 inches in diameter
Suspension and tire choices
A front strut spacer lift raises the body at the front without changing the axle position. The front shocks and sway bar links can end up at a steeper angle, so check their range after the change. On a 4WD truck, the front driveline angle also changes, which is worth watching for vibration on the highway.
Upper control arms and ball joints take the most change when the front rides higher. Factory arms can be worn or bent after years on the road, so inspect the bushings and joints before installing a new kit. When replacing arms, confirm the new parts match the model year and that the correct arm is used for each side.
Tire clearance is often limited by the inner fender or the steering stop, not just spring height. Turn the wheels to full lock on both sides and watch for rubbing. A brake line or wiring harness that sits close to the fender liner may need a small reroute.
- Inspect control arm bushings before installing
- Check front driveline angle after the lift
- Rub-test tires at full steering lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 61180 |
| UPC | 614901022407 |
| Type | Leveling lift kit, strut spacer |
| Maximum lift | 2 inches |
| Front lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Black |
| Drivetrain | 4WD only |
| Maximum tire diameter | 35 inches |
Vehicle fitment
It fits 4WD 2006 to 2010 Dodge Ram 1500 trucks and 4WD 2011 to 2019 Ram 1500 trucks in the trims covered for each range.
The kit does not fit TRX4 models or air bag equipped trucks, and it is not for the Ram Rebel. The 2020 and later Ram 1500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp’s 56004B uni-ball upper control arms are available as a replacement for the 2009 to 2018 factory control arms. The 56004B should not be used on a 2019 truck. Air bag equipped trucks are not compatible with this kit.


























