Overview
The Pro Comp 58501 is a 5 inch rear block kit for leaf spring equipped vehicles. Its purpose is rear lift, and the kit is the block set needed to achieve it on a leaf spring suspension.
The taper on these blocks is aimed at keeping driveshaft angles in better shape once the rear is lifted. Vehicle fit depends on the spring pack and axle, so verify it before buying.
Key features
- 5 inch rear lift
- Tapered lift blocks
- Built for leaf spring rear suspensions
Clearance at the raised rear
A 5 inch rear block moves the axle down and away from the body, which can change tire clearance in the wheel wells and at the fender edge. Turning the steering wheel to full lock and driving over uneven ground are good ways to find rubbing. Mud flaps, fender liners and tire size all affect how much room is left.
Brake lines and the emergency brake cable also need a look because they run along the axle. Make sure they have enough slack at full droop and that they are secured away from the springs. Shock travel is another point to check, since a taller rear can limit how far the shock extends.
- Check tire rub at full steering lock
- Confirm brake line slack at full droop
- Inspect fender liners and mud flaps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 58501 |
| UPC | 614901209525 |
| Type | Rear block kit with U-bolts |
| Lift height | 5 in |
| Block shape | Tapered |
Vehicle fitment
Confirm the rear spring pack and axle before ordering, since fit varies by vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents on arrival and compare them with your installation plan.








