Overview
The Pro Comp Nitro 61180K is a leveling lift kit for the 4WD Dodge Ram 1500 with the new rear coil spring suspension. It fits the 2009 to 2010 Dodge Ram 1500 and the 2011 to 2016 Ram 1500 in several trims, including Laramie, SLT, ST, Sport and TRX4 on the earlier trucks and Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, ST, Special Service, Sport and Tradesman on the later trucks.
The kit lifts the front 2.5 inches with strut spacers and the rear 1 inch with coil spring spacers. It allows tires up to 35 inches and removes the factory nose-down rake. It also suits front-mounted accessories such as snow plows, heavy-duty bumpers and winches. The kit includes bump stop extensions, hardware and instructions.
Key features
- 2.5 inches of front lift
- 1 inch of rear lift
- Front strut spacers
- Rear coil spring spacers
- Bump stop extensions included
- Maximum tire size of 35 inches
- Keeps the factory steering geometry, per the manufacturer
Rear coil springs and bump stops
Rear coil spring spacers raise the back of the truck by adding height at the spring seat, which often matches a front strut lift to level the stance. Because the spring is working at a new position, the shocks, bump stops and driveline angles each see changes. Check driveline angles after the lift and recheck any vibration at highway speed, since small changes can build into noticeable shudder.
Bump stop extensions help limit how far the suspension compresses before the stops contact, which matters on rough terrain or with heavier loads. Shocks should be checked for length and wear once the new height settles. Regular inspection of the strut mounts, spring seats and fasteners is worth making part of routine service, especially for trucks that see frequent off-road use.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 61180K |
| UPC | 614901022490 |
| Type | Nitro leveling lift kit |
| Front lift height | 2.5 inches |
| Rear lift height | 1 inch |
| Front lift method | Strut spacers |
| Rear lift method | Coil spring spacers |
| Maximum tire size | 35 inches |
| Spacer material | Steel |
| Finish | Black |
Vehicle fitment
It is a direct fit for the 2009 to 2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport and TRX4 trims, and for the 2011 to 2016 Ram 1500 in the trims covered in the vehicle fitment section.
The kit will not work on the 2013 or 2015 Ram 1500, and it will not fit the TRX4. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the wheel alignment once the new height is in place. Because the rear is lifted with coil spring spacers, check the driveline angles afterward.
What’s included
Bump stop extensions, strut spacers, rear coil spring spacers, all necessary hardware and instructions.









