Overview
The Pro Comp 2.5 Inch Rear Block With U-Bolt Kit, part number 58256 (EXP58256), is a rear lift block kit for leaf spring equipped vehicles. It gives a 2.5 inch rear lift and is a direct fit kit.
The kit uses tapered lift blocks, which help retain the vehicle’s driveshaft angles. It is the rear lift block kit for achieving rear lift on a leaf spring equipped vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 2.5 inch rear lift block kit
- Tapered lift blocks
- Helps retain driveshaft angles
- Includes U-bolts
- For leaf spring equipped vehicles
- Direct fit
Driveshaft angle and alignment
A rear lift changes the angle between the transmission output and the pinion, and that angle is what drives vibration and driveline wear. Tapered blocks are designed to keep those angles closer to their original relationship than flat blocks, but the driveline still needs to be checked after the lift. Look for vibration at highway speeds, a clunk when shifting, or wear on the u-joints and slip yoke.
Other parts can also need attention. Brake lines may need extra slack, the shock mounts may sit at a different angle, and the bump stops can end up in a new position. Tire clearance at full steering and suspension travel should be checked, and the rear alignment and driveline angles should be measured by a shop after installation. Keeping records of the work makes future service easier.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 58256 (EXP58256) |
| UPC | 614901209648 |
| Product type | Rear lift block and U-bolt kit |
| Lift | 2.5 inch |
| Position | Rear |
| Block design | Tapered |
| Suspension type | Leaf spring |
| Fit type | Direct fit |
Vehicle fitment
It is intended for leaf spring equipped vehicles. Fit depends on the spring setup, so check your vehicle’s year, model and trim before buying.
Match your vehicle’s year, model and trim to the kit before ordering, and measure your spring setup against the blocks.
Installation notes
Rear lift blocks change axle position and driveshaft angles, so professional installation is strongly recommended. Support the vehicle on rated jack stands on level ground.
- Tighten the U-bolts to the correct torque and retorque after the first drive.
- Have the alignment and driveshaft angle checked afterward.
- Check brake line length and tire clearance at the new height, and keep to local height rules.
What’s included
- Rear lift blocks
- U-bolts






