Overview
The Pro Comp ES6000 Series front strut, part number 620553, fits 2004 to 2013 Ford F-150 trucks. It is rated for 0 to 3 in. of lift and uses the factory upper and lower mounts.
The strut is gas-charged with an expanded twin-tube design that increases fluid capacity by up to 50 percent. It gives a smooth ride on the road with better handling off road, and it is designed to be used with the OEM coil spring.
Key features
- Gas-charged expanded twin-tube design, with fluid capacity up to 50 percent higher.
- Double-welded shock mounts for maximum strength.
- Rated for 0 to 3 in. of lift.
- Factory upper and lower mounts.
- Rated for 0 to 3 in. of lift.
Struts and coil springs
A strut is part of the suspension structure as well as the damper, so it carries load from the spring and the steering knuckle. When a strut is replaced, the coil spring is often inspected at the same time, because a weak or sagged spring changes ride height and shifts the strut’s working range. Expanded twin-tube designs add fluid capacity, which helps the damping stay steady during long, rough drives.
Front struts wear faster on trucks that tow, carry heavy loads or drive on rough roads, so check the upper mounts, bearing and bump stops during installation. A lift up to the rated range changes the strut’s extension, which makes spring height and strut fit more important. Replace the strut and spring together when either shows fatigue, and recheck the alignment after the work is complete.
- Inspect the upper mount for cracks or play
- Check spring seats and rubber isolators
- Recheck alignment after strut replacement
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 620553 |
| UPC | 614901114690 |
| Shock series | ES6000 (strut) |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 3 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It fits 2004 to 2013 Ford F-150 trucks as a front strut rated for 0 to 3 in. of lift.
The list covers only the F-150 for those model years, so Super Duty trucks and the F-150 from the 2014 model year onward are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strut requires the OEM coil spring. Because the lift range goes up to 3 in., check the spring height and the strut’s fit against your truck’s front suspension before installing.
What’s included
One ES6000 front strut.
Not included: the OEM coil spring, which the strut requires.






















