Overview
The Pro Comp ES6000 Series front strut, part number 618053, fits 1996 to 1998 Toyota 4Runner and 1998 to 2004 Toyota Tacoma trucks. It is rated for 0 to 2 in. of lift and uses the factory upper and lower mounts.
The strut is gas-charged and built on an expanded twin-tube design that increases fluid capacity by up to 50 percent. It offers a smooth ride on the road and helps off-road handling. It is made to work with the OEM coil spring rather than replace it.
Key features
- Gas-charged twin-tube design with expanded fluid capacity of up to 50 percent.
- Double-welded shock mounts for strength and durability.
- Rated for 0 to 2 in. of lift.
- Factory upper and lower mounts.
- Rated for 0 to 2 in. of lift.
Lift range and spring height
The lift rating on a strut tells you how much height change the damper and spring geometry were designed for. A strut rated for 0 to 2 in. suits stock-height and lightly lifted trucks. Taller lifts change the spring length and the angle of the strut, so the fit and damping behavior may no longer match the original design.
Before installing, check the coil spring for sag, cracks and rust, and compare its height with a known good spring if one is available. Inspect the spring seat and insulator pad, since a worn pad can allow noise and uneven loading. Keeping the spring and strut matched helps the front end ride evenly and keeps the steering predictable.
- Confirm the truck’s current ride height
- Inspect the spring seat and insulator
- Check for rust on the spring coils
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 618053 |
| UPC | 614901112351 |
| Shock series | ES6000 (strut) |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 2 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front strut for 1996 to 1998 Toyota 4Runner and 1998 to 2004 Toyota Tacoma trucks.
The list does not include the Toyota 4Runner from 1999 onward or the Tacoma from 2005 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strut requires the OEM coil spring. Check the spring’s condition and the factory mounts before installing the new strut.
What’s included
One ES6000 front strut.
Not included: the OEM coil spring, which the strut requires, and any dust boot.













