Overview
The Pro Comp 61120 is a 2-inch leveling lift kit that uses coil spring spacers to raise the front end. It comes as a kit, lifts the front only, and is made of black steel.
Pro Comp describes its kits as suspension systems for most trucks, Jeeps and SUVs. This kit does not add bump stops or a track bar drop, so the front lift comes from the spacers alone.
Key features
- 2-inch front lift height
- Coil spring spacers
- Steel construction with a black finish
- Front lift only
Setting up a leveling kit
A leveling kit raises the front end to match the rear, which can help the truck sit level and clear larger tires. Because it lifts the front only, the front and rear will have different geometry, and that difference should be considered when choosing tires, wheels and accessories. Coil spring spacers keep the factory spring in place, so the change in ride height comes mainly from the spacer itself.
Before installing, check the condition of the shocks, bump stops and track bar, since worn parts often show up once the height changes. Clean the spring seat and inspect the coil springs for cracks. After installation, have the alignment checked, look for rubbing at full steering lock, and recheck the bolts after the first few drives.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 61120 |
| UPC | 614901096415 |
| Front lift height | 2 inches |
| Front lift method | Coil spring spacers |
| Spacer material | Steel |
| Finish | Black |
| Track bar drop | Not included |
| Bump stops | Not included |
| Rear lift | Front lift only |
Vehicle fitment
Check fit against your vehicle’s year, model and trim first, and make sure the spacers suit your coil springs.
Installation notes
A 2-inch front lift changes front geometry, so have the alignment checked after installation. Because the kit has no track bar drop, check the track bar angle once the spacers are in.
What’s included
One leveling kit with coil spring spacers.
Not included: track bar drop and bump stops.









