Driveline Parts
Showing 13–24 of 182 resultsSorted by popularity
-
-
Drive Shafts & Drive Shaft Components
J.E. Reel 1350 Rear Drive Shaft for M220/Dana 44 (8 Speed Automatic Transmission) – 3518JLR-4R
Drive Shafts & Drive Shaft ComponentsJ.E. Reel 1350 Rear Drive Shaft for M220/Dana 44 (8 Speed Automatic Transmission) – 3518JLR-4R
- Rear driveshaft for 2019 Jeep Wrangler JL Unlimited, 8-speed automatic
- Built for the M220 and Dana 44 driveline
- 1350 CV joint, maximum angle under 32 degrees
- Direct fit, rear position
- Part number JER3518JLR-4R
SKU: JER3518JLR-4R -
Drive Shafts & Drive Shaft Components
J.E. Reel 1350 OE Replacement Rear Drive Shaft (Automatic Transmission) – 3518JL-4R
Drive Shafts & Drive Shaft ComponentsJ.E. Reel 1350 OE Replacement Rear Drive Shaft (Automatic Transmission) – 3518JL-4R
- Rear driveshaft for 2019 Jeep Wrangler JL two-door, automatic transmission
- Stock to 2 1/2-inch lift, tires up to 33 inches for mild use
- 1350 platform, original-equipment design
- Extended length, direct fit
- Part number JER3518JL-4R
SKU: JER3518JL-4R -
Drive Shafts & Drive Shaft Components
J.E. Reel 1350 Front Drive Shaft for M186/Dana 30 (8 Speed Automatic Transmission) -3518JL-24FFT
Drive Shafts & Drive Shaft ComponentsJ.E. Reel 1350 Front Drive Shaft for M186/Dana 30 (8 Speed Automatic Transmission) -3518JL-24FFT
- Front driveshaft for 2019 Jeep Wrangler JL Unlimited, 8-speed automatic
- Built for the M186 and Dana 30 driveline
- 1350 CV joint, maximum angle under 32 degrees
- Direct fit, front position
- Part number JER3518JL-24FFT
SKU: JER3518JL-24FFT -
Drive Shafts & Drive Shaft Components
J.E. Reel 1310 Replacement Front Drive Shaft – 31JK-OE-24F
- Replacement front shaft for 2007–2011 Jeep Wrangler JK Unlimited
- Heavy-duty 1310 series, designed for tires up to 35 inches
- Stock length, non-CV design
- No slip yoke eliminator required
- Part number JER31JK-OE-24F
SKU: JER31JK-OE-24F -
Drive Shafts & Drive Shaft Components
J.E. Reel 1310 Heavy Duty Rear Drive Shaft (Manual Transmission) – 3118JL-2RM
Drive Shafts & Drive Shaft ComponentsJ.E. Reel 1310 Heavy Duty Rear Drive Shaft (Manual Transmission) – 3118JL-2RM
- Heavy-duty 1310 rear driveshaft for manual transmission
- Built for mild use with tires up to 35 inches
- Joint angle limits: 1310 CV under 26 degrees, 1350 CV under 32 degrees
- Extended length, rear position
- Part number JER3118JL-2RM
SKU: JER3118JL-2RM -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 Rear Drive Shaft – 92-2149-1
- Fits the 2018–2020 Jeep Wrangler JL Unlimited, four-door, automatic transmission
- Rear CV driveshaft, extended length
- Heavy-duty D.O.M. tubing and 1350 series U-joints
- Dynamically balanced for smoother running
- No slip yoke eliminator required
SKU: G/292-2149-1 -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 JL Sport M/T Front Drive Shaft – 92-2150-1M
Drive Shafts & Drive Shaft ComponentsG2 Axle and Gear 1350 JL Sport M/T Front Drive Shaft – 92-2150-1M
- Fits the 2018–2020 Jeep Wrangler JL, manual transmission
- Heavy-duty front CV driveshaft with D.O.M. tubing
- 1350 series solid-body U-joints for durability
- Dynamically balanced to reduce vibration
- No slip yoke eliminator required
SKU: G/292-2150-1M -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 JL Sport A/T Front Drive Shaft – 92-2150-1
Drive Shafts & Drive Shaft ComponentsG2 Axle and Gear 1350 JL Sport A/T Front Drive Shaft – 92-2150-1
- G2 Axle and Gear 92-2150-1 front driveshaft for automatic Wrangler JL Sport
- Extended length CV design with 1350 series u-joints
- Heavy duty D.O.M. tubing, dynamically balanced
- No slip yoke eliminator required
- Fits 2018–2020 Jeep Wrangler JL Sport and Unlimited Sport, 2-door and 4-door
SKU: G/292-2150-1 -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 JL Sport A/T 2 Dr Rear Drive Shaft – 92-2149-2
Drive Shafts & Drive Shaft ComponentsG2 Axle and Gear 1350 JL Sport A/T 2 Dr Rear Drive Shaft – 92-2149-2
- G2 Axle and Gear 92-2149-2 rear driveshaft for automatic Wrangler JL 2-door Sport
- Extended length CV design with solid body 1350 series u-joints
- Heavy duty D.O.M. tubing, dynamically balanced
- No slip yoke eliminator required
- Fits 2018–2020 Jeep Wrangler JL 2-door Sport and Sport S
SKU: G/292-2149-2 -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 JL Rubicon M/T Front Drive Shaft – 92-2151-1M
Drive Shafts & Drive Shaft ComponentsG2 Axle and Gear 1350 JL Rubicon M/T Front Drive Shaft – 92-2151-1M
- G2 Axle and Gear 92-2151-1M front driveshaft for manual Wrangler JL Rubicon
- Extended length CV design with 1350 series u-joints
- Built from heavy duty D.O.M. tubing and balanced to reduce vibration
- No slip yoke eliminator required
- Fits 2018–2020 Jeep Wrangler JL Rubicon, 2-door and Unlimited 4-door
SKU: G/292-2151-1M -
Drive Shafts & Drive Shaft Components
G2 Axle and Gear 1350 JL Rubicon M/T 2 Dr Rear Drive Shaft – 92-2152-2M
Drive Shafts & Drive Shaft ComponentsG2 Axle and Gear 1350 JL Rubicon M/T 2 Dr Rear Drive Shaft – 92-2152-2M
- G2 Axle and Gear 92-2152-2M rear driveshaft for manual Wrangler JL 2-door Rubicon
- Extended length CV driveshaft for the rear of the JL
- Heavy duty D.O.M. tubing with 1350 series u-joints
- No slip yoke eliminator required
- Fits 2018–2020 Jeep Wrangler JL 2-door Rubicon, manual transmission
SKU: G/292-2152-2M
What the driveline includes
The driveline carries power from the transmission and transfer case to the axles. Drive shafts connect the sections, universal joints let them flex as the suspension moves, and slip yokes let the length change. This catalog branch also includes speedometer gears, flange and pinion yokes, strap and bolt kits, boots, shims and support bearings.
Parts and when you need them
Common reasons to shop this category include the following.
- Vibration or clunking at speed, often from worn universal joints or a bent shaft
- Lift kits that change driveshaft angles and call for a CV-style shaft or a spacer or shim
- Torn boots or a worn slip yoke that lets in dirt and loses grease
- Conversion of a pinion yoke from straps to a U-bolt design
- Broken strap or bolt hardware at a transfer case or axle yoke
Choosing the right part
U-joint series such as 1310 and 1410 refer to the size of the cap and yoke, so confirm the series before ordering. Shaft listings note front or rear, vehicle model, engine, transmission and axle, and the length. Package sets list dimensions and whether yokes and flanges are included.
After a lift, check driveshaft angles. CV or double-cardan shafts, such as the CVF-style shafts in the sample listings, handle larger operating angles, but they still need correct pinion angle. Heavier-duty parts matter if you run big tires or add a locker.
Installation and balance
Mark the drive shaft position before removal so it returns in phase, and support it so it does not hang from a joint. Torque bolts and straps to the manufacturer's specifications. Use threadlocker only where specified.
Grease any serviceable joints and slip yokes at the interval in your manual. A vibration after installation can come from a wrong angle or an unbalanced shaft, and drivelines are safety-critical rotating assemblies, so consider professional installation and balancing if you have any doubt.
Keep an eye on your service intervals. Drive shaft joints, slip yokes and support bearings that are greased on schedule last far longer, and a quick look for dried grease, rust-colored dust at the cap or play in a joint can catch problems before a breakdown on the trail.
Inspection, angles and avoiding vibration
Driveline vibration is one of the most common complaints on modified 4x4s, and it is usually caused by angles rather than by a defective part. For a standard two-joint shaft, the angles at both ends should be close to equal and opposite, and ideally small. A lift, a transfer case drop or a change in axle position can change them. Measuring with an angle finder at ride height gives a good baseline.
- Inspect U-joints for play by twisting the shaft, and replace any that feel notchy or loose
- Look for rust-colored dust at the caps, which signals dry or failing joints
- Check that the slip yoke has enough engagement in the transmission or transfer case at full droop
- Make sure the shaft is not rubbing on the skid plate, crossmember or exhaust at full compression
- Verify the flange yokes and companion flanges are clean and flat, and use the correct bolts
Mistakes to avoid include running worn joints on a new shaft, reusing damaged strap bolts and ignoring a small vibration. A shaft that has been dented, or that has lost a balance weight, can shake the whole vehicle. If a vibration appears only at a certain speed, note it and have the shaft balanced, since driveline failures at highway speed can be dangerous.
Popular Driveline Parts brands
- Crown Automotive (32)
- Rubicon Express (27)
- Rugged Ridge (24)
- Dana Spicer (17)
- Pro Comp Suspension (14)
- G2 Axle and Gear (13)
- Trail Gear (12)
- Omix-Ada (10)
- J.E. Reel (7)
- TeraFlex (5)
- Rough Country (5)
- Fabtech (5)
Shop Driveline Parts by type
- Drive Shafts (85)
- Speedometer Drive Gear (34)
- Drive Shaft Spacer (12)
- Universal Joint U-Bolt Kit (10)
- Drive Shaft Shim Kit (6)
- Drive Shaft Boot (6)
- Driveshaft Flange Yoke (6)
- Universal Joint Strap Kit (5)
- Drive Shaft Slip Yoke (5)
- Driveshaft Bolt (3)
- Drive Shaft CV Joint Repair Kit (3)
- Driveshaft CV Socket Yoke Assembly (2)
- Drive Line Bearings (2)
- Drive Shaft Pinion Yoke Conversion Kit (2)
- Drive Shaft Slip Yoke Felt (1)
Driveline Parts FAQ
How can I tell if my U-joints are worn?
Symptoms include clunking when shifting between drive and reverse, vibration that rises with speed and visible play when you twist the shaft by hand. Replace them in sets for even wear.
Do I need a new drive shaft after a lift?
Often an adjustment is enough, but larger lifts can push angles beyond what a standard shaft handles. A CV or double-cardan design, spacers or shims may be needed, so check the manufacturer's guidance.
What do 1310 and 1350 mean for U-joints?
They are series numbers that describe the joint's size and strength. Match the series to the yoke on your shaft, since different series are not interchangeable.
Why does my driveshaft vibrate?
Common causes are worn U-joints, a bent or unbalanced shaft, wrong pinion angle after a lift and worn slip yokes. Inspect each in turn, then have balance checked if it persists.


