Overview
The Trail Gear Longfield Driveline Spacer, part number 301698-1-KIT, is a driveshaft spacer kit for a driveline that has become too short after a suspension lift. Trail Gear offers the spacer in 1 inch and 1.5 inch sizes, with bolts.
It is a universal fit spacer, so it is not matched to a particular year, make, model or trim.
Key features
- Spacer for a driveline that runs too short after a lift
- 1 inch and 1.5 inch spacer sizes offered
- Bolts supplied with the spacers
- Universal fit
Measuring for spacer size
A driveline spacer adds length to the driveshaft after a suspension lift, which moves the joint angles. Measure the distance between the transfer case and axle yoke at the lifted height, and compare it with the length the driveshaft can take up at its slip yoke. Small changes in length matter, so take the measurement with the vehicle at its normal ride height.
Choosing between thicknesses comes down to how much length is missing and how the angles change. A thicker spacer may push the angles further from their target, so confirm the joint angles before deciding. After installation, check the driveline for vibration on the road and inspect the bolts after the first few drives. Keep the old driveshaft hardware for comparison.
- Measure at ride height
- Check joint angles before choosing thickness
- Recheck bolts after the first drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301698-1-KIT |
| UPC | 700006929991 |
| Spacer sizes | 1 in and 1.5 in |
| Hardware | Bolts included |
| Fitment listing | Universal Fit |
Vehicle fitment
This spacer is universal fit. Measure your driveline length and joint angles before choosing between the 1 inch and 1.5 inch thicknesses.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A spacer lengthens the driveline, which changes joint angles, so have driveline angles checked and watch for vibration after installation.
What’s included
Spacers in 1 inch and 1.5 inch sizes, with bolts.
Not stated: Confirm which spacer thickness is in your kit before starting.









