Overview
The G2 Axle and Gear 92-2151-1 is an extended length CV front driveshaft for the 2018–2020 Jeep Wrangler (JL) Rubicon with an automatic transmission. It is a direct fit for 2-door and Unlimited 4-door versions.
This heavy duty 1 ton upgrade for the JL driveline is built with heavy duty D.O.M. tubing and solid body 1350 series u-joints. The assembly is dynamically balanced to eliminate vibration, and no slip yoke eliminator is required for this application.
Because the shaft is an extended length part, measure your existing driveshaft and the distance from the transfer case to the front axle before installing it.
Key features
- Heavy duty D.O.M. tubing
- Solid body 1350 series u-joints
- Dynamically balanced to eliminate vibration
- CV joint design
- Extended length
- No slip yoke eliminator required
Driveline angles and lifts
A shaft with extended length changes the working angles between the transfer case, the front axle pinion and the joints. Those angles matter most on a lifted Wrangler, where a steeper driveline can load the CV joints harder over time. Measure the distance from the transfer case to the front axle before ordering, and again after any suspension change, so the shaft stays within the range it was sized for.
Regular inspection keeps the driveline healthy. Look at the CV boots for cracks or grease leaks, check the joint bolts for tightness after the first few trail runs, and listen for clicks or vibration that rise with speed.
- Check CV boots for tears or grease leaks
- Recheck shaft bolts after the first trail runs
- Note any vibration that rises with speed
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 92-2151-1 |
| Position | Front |
| Transmission type | Automatic |
| Length | Extended |
| Joint type | CV |
| Tubing | Heavy duty D.O.M. |
| U-joints | Solid body 1350 series |
| Slip yoke eliminator | Not required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2020 Jeep Wrangler (JL) Rubicon in 2-door and Unlimited 4-door versions.
Fitment covers the 2018–2020 Jeep Wrangler (JL) Rubicon. Verify fit against your vehicle’s year, model and trim before ordering.
Installation notes
No slip yoke eliminator is needed, so the installation does not call for one. Check the extended length against the transfer case and front axle before bolting the shaft in.
What’s included
The front driveshaft assembly. Check the package contents against your installation before starting.












