Select your vehicle

Trail Gear Driveline Spacer Kit – 105085-3-KIT

Trail Gear

$63.26In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 8:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 1.5 inch aluminum driveline spacer kit
  • Each kit contains one spacer and mounting hardware
  • Fits front or rear shaft
  • Fits the 1990–1995 Suzuki Samurai

Description

Overview

The Trail Gear 105085-3-KIT is a 1.5 inch driveline spacer kit for the 1990–1995 Suzuki Samurai, and it fits the front or the rear shaft.

This spacer is 1.5 inch long and made from 6061 T6 aluminum, and each kit contains one spacer with the mounting hardware. Spacers are made in 3/4 inch, 1 inch, 1.25 inch and 1.5 inch lengths, and this kit is the 1.5 inch version. It fits the JA, JL and JS Samurai models.

Key features

  • 1.5 inch spacer length
  • 6061 T6 aluminum
  • Mounting hardware included
  • Fits the front or rear shaft

Choosing spacer length

Spacer length sets how far the driveshaft yoke is moved, so the right size depends on how much the driveline angle has changed. Start by measuring the existing angles with the vehicle at its normal ride height, then compare them with the angle you want. Small changes may need only a thin spacer, while larger lift or transfer case changes can call for a longer one. Avoid stacking spacers, since each added joint adds more stress.

Check the shaft and yoke sizes before assuming a part will bolt on, even within the same model range. Keep the mounting bolts snug and check them after the first drives, since vibration can back them off. Look at the joints and dust covers at the same time, and replace worn U-joints before they fail on the trail. A short inspection after each change helps confirm that the length chosen is correct.

Specifications

Brand Trail Gear
Part number 105085-3-KIT
UPC 70000621226
Spacer length 1.5 inch
Material 6061 T6 aluminum
Fits Front or rear shaft
Contents One spacer and mounting hardware

Vehicle fitment

It fits the 1990–1995 Suzuki Samurai, including the JA, JL and JS models.

The 1986–1989 Samurai is not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One 1.5 inch spacer and mounting hardware.

SKU: TGI105085-3-KIT Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Fitment

VehicleYearsTrims
Suzuki Samurai1990–1995JA, JL, JS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

How long is this spacer?

It is listed at 1.5 inch. Trail Gear says its spacers come in 3/4 inch, 1 inch, 1.25 inch and 1.5 inch lengths, so pick the length that matches the part number you need.

Does this kit fit the 1986–1989 Suzuki Samurai?

No. It fits the 1990–1995 Suzuki Samurai, so the earlier 1986–1989 years are not covered. Check your model year before ordering.

Are the spacers aluminum?

Yes. They are made from 6061 T6 aluminum, and each kit contains one spacer and the mounting hardware for the front or rear shaft.

Can I stack two spacers to reach a longer length?

No. It is better to choose one spacer of the length you need. Stacking adds an extra joint and more stress on the mounting bolts, which can raise vibration. If more length is needed, check the shaft angle first and consider whether the drivetrain change requires a different approach.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon