Overview
The Dana Spicer 10097841 is a front driveshaft assembly for the Ultimate Dana 60 front axle on the Jeep Wrangler JL and Gladiator JT. It is a direct fit for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator.
The driveshaft uses a 1350 series design built from higher strength steel, with extra thick tubing for trail durability. A slip assembly sits at the transfer case end to absorb impacts and keep dirt out. Every bolt-in hardware item needed for installation is included.
Key features
- Front driveshaft for the Ultimate Dana 60 front axle
- 1350 series construction
- Extra thick tubing
- Transfer case slip assembly
- All installation hardware included
Driveshaft care on the trail
A front driveshaft carries torque from the transfer case to the front axle, so its U-joints and slip yoke see constant load when the vehicle is driven off-road. Inspect the joints regularly for play, grease leaking from the caps, and vibration that changes with road speed. Clicking or binding on tight turns can point to a worn joint or yoke and is worth checking before a long trip.
Driveshaft work involves heavy parts and balance, so many owners have a shop handle the replacement with a balancer available. When the assembly is replaced, the joints, slip yoke seal and axle yoke are often inspected at the same time. Keep the driveline angles in mind after any lift, since a mismatch can cause vibration even with a new part.
- Check U-joints for play every few oil changes
- Inspect the slip yoke seal for leaks
- Re-torque driveline bolts after the first trail runs
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S10097841 |
| Position | Front |
| Driveshaft series | 1350 |
| Tubing | Extra thick |
| Slip location | Transfer case |
| Hardware | All included for bolt-in fit |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2-door and 4-door 2018–2026 Jeep Wrangler (JL) models and 2020–2026 Jeep Gladiator (JT) models.
Confirm fit for your vehicle’s year, model and trim before ordering, since coverage is limited to the Wrangler JL and Gladiator JT years above.
What’s included
The front driveshaft assembly with all of the bolt-in hardware.









