Overview
The 100130-1-KIT is a heavy duty driveline kit built around a Matsuba U-joint of the type used on Toyota OEM drive shafts. It fits the 1984–1995 Toyota 4Runner (DLX and SR5) and the 1979–1995 Toyota Pickup in the Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
The joints were tested to 3700 ft-lbs of torque before failure. The kit is for the front position and is a universal fit.
Key features
- Heavy duty driveline kit
- Matsuba U-joints
- Four install clips included
- Zerk grease fitting included
- Front position
Greasing and joint wear
A driveline U-joint depends on grease to keep its bearings moving freely. Grease the joint after installation and at regular service intervals, especially after water crossings or mud driving. Dry joints wear faster, and worn bearings often make a clunk or vibration when the vehicle changes speed.
When replacing a joint, check the yoke ears and the companion flange for wear or galling. Clean any old grease from the fitting before adding new grease, so dirt does not get pushed into the bearing cups. Off road, reinspect the driveline after hard use to confirm the clips and fasteners remain tight.
- Grease the joint after installation
- Regrease after water and mud driving
- Listen for clunks or vibration
- Check yoke ears and flanges for wear
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100130-1-KIT |
| UPC | 70000621237 |
| Joint | Matsuba U-joint |
| Tested torque | 3700 ft-lbs before failure |
| Position | Front |
| Fitment type | Universal fit |
Vehicle fitment
Its fit covers the 1984–1995 Toyota 4Runner (DLX and SR5) and the 1979–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo). Confirm your vehicle’s year, model and trim before ordering.
The list does not include the Tacoma, the Land Cruiser or any Toyota model after 1995. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes four install clips and a Zerk grease fitting, so the joint can be greased after assembly. Attach the clips and fitting as part of the install.
What’s included
The kit includes the heavy duty U-joint, four install clips and a Zerk grease fitting.






