Select your vehicle

Dana Spicer Drive Shaft End Yoke – 10049138

Dana Spicer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer 1310 series drive shaft end yoke with 32 splines
  • BS yoke style that converts the transfer case companion flange
  • Original equipment quality from Dana Spicer
  • Fits 2007–2018 Jeep Wrangler JK, 2-door and 4-door

Description

Overview

It is a 1310 series drive shaft end yoke with 32 splines and a BS yoke style. It is a direct fit for the 2007–2018 Jeep Wrangler (JK), and it converts the transfer case companion flange to a 1310 series end yoke kit.

Dana Spicer describes its end yokes as original equipment parts, made to the same standards and specifications as the end yokes installed in the vehicle when it was built. The conversion is useful for owners who want the 1310 series joint at the transfer case end of the drive shaft.

Key features

  • 1310 series end yoke
  • 32 spline count
  • BS yoke style
  • Converts the transfer case companion flange to a 1310 series end yoke

Checking the transfer case flange

The end yoke connects the drive shaft to the transfer case, so its fit determines how the driveline behaves. Because this yoke converts the companion flange to a 1310 series end yoke, the flange surface should be clean and free of burrs before assembly. A seal surface that is pitted or scored should be replaced rather than reused.

The drive shaft and the transfer case output seal are usually inspected together, since a worn seal can leak after the yoke is installed. The flange bolts should be set to the correct torque, and the driveline should be checked for vibration on a test drive. Matching the spline count and yoke style to the drive shaft prevents binding and wear.

  • Clean the flange before fitting the yoke
  • Check the output seal for leaks
  • Tighten the flange bolts to the correct torque
  • Test the driveline for vibration after installation

Specifications

Brand Dana Spicer
Part number D/S10049138
Series 1310
Spline count 32 splines
Yoke style BS
Function Converts the transfer case companion flange to a 1310 series end yoke kit
Fitment type Direct fit

Vehicle fitment

It fits the 2007–2018 Jeep Wrangler (JK), in both 2-door and 4-door versions.

Only the JK is covered. The TJ, LJ, YJ, Gladiator and Cherokee are not.

What’s included

The end yoke, supplied as a conversion for the transfer case companion flange.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Dana Spicer 10049138 fit a 2013 Jeep Wrangler JK?

Yes. It fits the 2007–2018 Jeep Wrangler (JK), in 2-door and 4-door versions, so a 2013 JK is covered. Confirm your transfer case and drive shaft setup before installing it.

What does the yoke convert?

It converts the transfer case companion flange to a 1310 series end yoke kit. The yoke has 32 splines and a BS yoke style.

Is this yoke original equipment quality?

Dana Spicer says its end yokes are original equipment parts, made to the same standards and specifications as the end yokes installed in the vehicle when it was new.

Should the transfer case seal be replaced with the yoke?

Often, yes. A worn seal can leak once the yoke is reinstalled, so replacing it during the job is the simplest time to do so.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon