Overview
The 5083001AA is a drive shaft boot for Jeep and Ram driveshafts. It fits the 2007–2018 Jeep Wrangler (JK) rear driveshaft, the 2003–2006 Jeep Wrangler (TJ), the 2005–2007 Jeep Liberty (KJ), and the 2008–2010 and 2011 Dodge Ram 1500.
The application is narrower for each vehicle. The JK boot is for the 2-door rear driveshaft, the TJ/LJ boot is for the front driveshaft and will not fit the Rubicon package, the Liberty KJ boot is for 2WD models with a manual transmission, and the Ram 1500 boot is for trucks with a two-piece rear driveshaft.
Crown Automotive has made and distributed Jeep replacement parts for more than 50 years. Its catalog includes over 8,000 part numbers, among them discontinued items.
Key features
- Drive shaft boot for Jeep and Ram driveshafts
- Covers the 2-door JK rear driveshaft
- Covers the TJ/LJ front driveshaft, excluding the Rubicon package
- Covers the 2WD manual transmission KJ Liberty
Driveshaft boot wear signs
A drive shaft boot keeps grease inside the joint and dirt and water out. When the rubber or plastic boot tears, grease leaks out and grit enters, which wears the joint quickly. Look for dried or spattered grease around the joint, cracks along the folds and a loose clamp. Early signs are often a light vibration or clicking when turning under load.
Because the boot and the joint are tied together, replacing a torn boot before the joint is damaged is far less work. Check the driveshaft’s position on your vehicle before choosing a boot, since front and rear shafts on these models differ. Clamps and hardware should be checked and replaced if worn, and the boot should sit squarely without twisting when the joint is at full travel.
- Grease spatter on nearby suspension parts
- Cracks at the boot folds
- Loose or damaged clamps
- Clicking when turning under load
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5083001AA |
| Product type | Drive shaft boot |
Vehicle fitment
It is for the 2007–2018 Jeep Wrangler (JK), 2-door and 4-door versions, the 2003–2006 Jeep Wrangler (TJ), the 2005–2007 Jeep Liberty (KJ), and the 2008–2010 and 2011 Dodge Ram 1500 trucks.
The TJ and LJ application is the front driveshaft, the JK application is the 2-door rear driveshaft, and the Liberty fits 2WD with manual transmission only. Make sure your body style and year match before ordering.
What’s included
The boot is the only item described. Confirm the package contents match your installation before starting.









