Overview
The Dana Spicer Dana 44 and 30 Inner Axle Seal, part 54381, is a single front inner seal for one side. It seals the housing to the axle shaft and keeps gear oil from leaking out the axle tube.
The product lists Dana 30 TJ and Dana 44 axles. The bullets also mention 2007 to 2014 JK Wrangler applications and a Dana 30 with aftermarket 30 spline shafts, so confirm the axle and the year before ordering.
Key features
- Single seal, one side only
- Front axle position
- Seals the housing to the axle shaft
Before you rebuild
Front inner seals wear gradually, and the lip that rides on the axle shaft is usually the first place oil shows up on the inside of the wheel. When the seal is replaced, the shaft surface it contacts matters as much as the seal itself. Look for grooves, pitting or rust where the lip runs, and clean the area before the new seal goes in.
Because the axle shaft is already out during this work, many rebuilders also replace the axle bearings, the hub seal and the housing gasket at the same time. Check the carrier bolts and bearing retainers while the axle is apart, and keep the housing free of old gasket material so the new seal seats evenly.
- Inspect the shaft surface before installing the seal
- Replace the seal every time the shaft is removed
- Refill with fresh gear oil after the axle is closed up
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 54381 |
| Axle location | Front |
| Axle types | Dana 30 TJ, Dana 44 |
| Quantity | One seal, one side |
Vehicle fitment
The bullets mention 2007 to 2014 JK Wrangler applications, but the product’s listed axle types are Dana 30 TJ and Dana 44, so the vehicle match is not clear. Confirm the axle and year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One inner axle seal for one side.


















