Select your vehicle
-13%

G2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Driver Side) – 195-2052-321

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear driver side axle shaft for Dana 44 JK Rubicon
  • Forged 4340 chromoly steel, made in the USA
  • Dual bolt pattern flange for 5 x 5 and 5 x 5.5
  • For use with 32 spline aftermarket lockers
  • Fits 2007–2014 Jeep Wrangler JK Rubicon

Description

Overview

The G2 Placer Gold Series Dana 44 JK Rubicon rear driver side axle shaft, part 195-2052-321, is a made in the USA replacement for the rear left position. It is built for 32 spline aftermarket lockers and fits the 2007–2014 Jeep Wrangler JK Rubicon.

The shaft is forged from 4340 chromoly steel with more material in the critical areas for added strength. The dual bolt pattern flange accepts 5 x 5 and 5 x 5.5 bolt patterns, and the Placer Gold Series is a heavy duty option for JK owners.

Key features

  • Rear driver side shaft for the Dana 44 JK Rubicon
  • Forged 4340 chromoly steel
  • Stronger forging with more material in critical areas.
  • Dual bolt pattern flange for 5 x 5 and 5 x 5.5
  • Made in the USA

Axle and locker matching

A rear axle shaft works as one part of a complete Dana 44 setup, so it should be matched to the locker, the carrier and the hub. The 32 spline count of the shaft has to match the locker’s spline, and the bolt flange pattern must line up with the wheel. Before buying, measure the axle side you have so the new shaft seats fully in the carrier and the locker.

Axle shafts take the most stress during hard articulation and when a locker engages, so regular checks pay off. Look at the shaft for cracks near the flange and the spline, and check the axle seal for leaks that can let the bearing run dry and bring grit into the carrier. Replacing a shaft often means checking the pinion seal and the locker bolts at the same time, since they are reached from the same work area.

  • Confirm the spline count on the locker before ordering
  • Inspect the flange bolts after the first few trail runs
  • Check the axle seal for leaks during service

Specifications

Brand G2 Axle and Gear
Part number 195-2052-321
UPC 631410118742
Axle type Dana 44 JK Rubicon
Position Rear left
Side Driver side
Material Forged 4340 chromoly steel
Bolt pattern Dual bolt pattern flange, 5 x 5 and 5 x 5.5
Locker compatibility 32 spline aftermarket lockers
Origin Made in the USA

Vehicle fitment

It fits 2007–2014 Jeep Wrangler (JK) Rubicon and Unlimited Rubicon models.

Wrangler TJ, YJ, LJ and JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The shaft is built for 32 spline aftermarket lockers, so confirm your locker’s spline count before ordering.

What’s included

One rear driver side axle shaft.

SKU: G/2195-2052-321 Categories: ,

Specification

Shipping weight 22.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2014Rubicon, Unlimited Rubicon

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this shaft fit a 2012 Wrangler JK Rubicon?

Yes. It fits 2007–2014 Jeep Wrangler (JK) Rubicon and Unlimited Rubicon models, so a 2012 Rubicon is covered. Confirm your year and model before ordering.

What lockers does it work with?

It is built for 32 spline aftermarket lockers. Confirm the spline count on your locker before ordering, since the shaft is made for that size.

Where is it made?

It is made in the USA. The shaft is forged from 4340 chromoly steel with more material in the critical areas, and the Placer Gold Series is built in the USA.

Should the axle bearing be replaced with the shaft?

Often it is a good time to check the bearing and seal, since the shaft has to be removed to reach them. Inspect the bearing for play or noise and replace worn parts while the shaft is out.

How can I tell if a rear axle shaft is wearing out?

Look for vibration under power, clicking when turning, grease leaking from the flange area, or a cracked flange. Any of these signs means the shaft should be inspected and replaced if damaged.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon