Overview
The Dana Spicer 13575 is a pinion seal slinger for Dana 44 axles in front or rear locations. It is designed to limit how much oil reaches the pinion seal, which helps prevent pinion seal leaks.
It is a universal fit by axle type. Fit depends on the axle being a Dana 44 in the front or rear location, not on a vehicle year or model.
Key features
- Limits the oil that reaches the pinion seal
- Designed to help prevent pinion seal leaks
- It is made for Dana 44 axles in the front or rear location.
- Small slinger design
Choosing and fitting a slinger
The pinion seal sits at the end of the drive pinion and keeps gear oil inside the carrier. Over time, oil can climb the pinion and work past the seal lip, especially when the axle runs a high fill or heavy use. A slinger sits on the pinion ahead of the seal and throws oil away from it, which reduces how much reaches the lip.
When you replace the slinger, look at the pinion seal at the same time. Check for a dry or hardened lip, grooves, and oil on the outside of the carrier. Clean the pinion shaft surface before fitting, and confirm the slinger seats fully against its shoulder so it turns freely without rubbing the housing.
- Check the axle location, front or rear, before ordering.
- Replace a worn pinion seal rather than reusing it.
- Keep the fill level correct after the job.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 13575 |
| UPC | 23913136499 |
| Component | Pinion seal slinger |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Fitment | Universal fit by axle type |
Vehicle fitment
It fits Dana 44 axles in the front or rear location. Fit follows the axle type and location rather than a vehicle year or model.
Check that your axle is a Dana 44 and note whether it is the front or rear unit before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pinion seal slinger, part 13575, as a single part.












