Overview
The Auburn Gear ECTED Max is a selectable locker for Dana 44 axles with 35 splines, part number 545021, designed for aftermarket 35 spline axles and 3.73 and down gears.
The unit works as a full-time limited slip differential and can also act as a full locking differential. An in-vehicle switch selects the locking mode, and the operator can change between limited slip and full spool on the fly at moderate speeds.
It is built for Dana 44 axles. Confirm fit for your vehicle’s year, model and trim before ordering.
Smooth street operation is part of its design, and no additional parts are needed for installation.
Key features
- Full-time limited slip plus a full locking mode
- Switch-selected locking, changed on the fly at moderate speeds
- Built for 35 spline aftermarket axles
- Designed for 3.73 and down gears
- Smooth street operation, per the manufacturer
- 4 year replacement warranty
Setup and driving habits
A selectable locker changes how the axle shares power, so driving habits matter. Turn full lock on only when traction is poor and speeds are moderate, and switch back before running on pavement or sharp turns. Full lock on dry hard surfaces can cause binding, tire scrub and extra drivetrain stress.
Because a locker works through the differential, gear oil quality and level affect how it engages and wears. After installation, check the oil and the cover gasket for leaks, and change the oil at the intervals suited to your axle. Inspect the switch wiring for chafing, since a damaged harness can leave the locker stuck in one mode.
- Check gear oil after the first drives
- Inspect switch wiring for chafing
- Avoid full lock on dry pavement
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 545021 |
| UPC | 814996006218 |
| Differential type | Selectable locker: full-time limited slip with switch-selected full lock |
| Axle type | Dana 44 |
| Axle spline | 35 splines |
| Gear ratio | 3.73 and down |
| Axle manufacturer | Dana |
| Operation | Smooth street operation |
| Warranty | 4 year replacement |
| Additional parts | None needed, per the manufacturer |
Vehicle fitment
No vehicles are named for this locker. The axle table lists Dana 44 JK, and the fitment column reads Universal Fit. Match the 35 spline count and the 3.73 or lower gear ratio to your axle housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing a locker means removing the axle cover and carrier, so this is usually a professional install, and the in-vehicle switch that selects the locking mode must be wired in during installation.
What’s included
The ECTED Max selectable locker, part 545021.














