Dana 30 vs Dana 44 vs Dana 60: how to identify the axle under your Jeep or truck, what each one handles, and when…
Dana 44 Axle Parts, Axles, Gears, and Modifications
Showing 25–36 of 469 resultsSorted by popularity
-
Hub Conversions
TeraFlex Front 8-Lug Locking Hub Conversion Kit – 3034411
- Fits 2007 to 2016 Jeep Wrangler JK, two- and four-door
- Full float front conversion with forged 4340 chromoly 35-spline stub shafts
- Forged 4140 chromoly spindle and 8 on 6.5 inch wheel bolt pattern
- Includes the TeraFlex performance big rotor kit
- Part number 3034411
SKU: TER3034411 -
-
Dana 44 Oil Seals
TeraFlex High Performance Tera30/44 Front Axle Tube Seals – 4354050
- Billet 6061-T6 aluminum front axle tube seals for oversized 3.25 inch tubes on Tera30 and Tera44 JK housings.
- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited, two- and four-door models.
- Outer triple O ring presses into the housing; inner double seal with a grease pocket.
- Specify axle tube thickness when ordering.
- Part number 4354050, UPC 843885033134.
SKU: TER4354050 -
-
Dana 44 Differential Covers
Rugged Ridge Boulder Aluminum Dana 44 Differential Cover – 16595.12
- Matte black aluminum cover for Dana 44 front and rear axles
- A356-T6 cast aluminum body
- Magnetic drain plug and dipstick bolt
- Precision machined sealing surface for gaskets or RTV
- Part number 16595.12
SKU: RUG16595.12 -
Dana 44 Differential Covers
Rancho Dana 44 Cast Iron Cover Red – RS6209
- Rancho RS6209 differential cover for Dana 44 front or rear axles
- Thick cast ductile iron with ribbed external construction
- Off-set, oversized fill plug for increased fluid capacity and quicker filling
- Durable red powder-coated finish
SKU: RANRS6209 -
-
Dana 44 Lockers and Spools
Power Trax Dana 44 27 Spline Lock Right Locker – 2414-LR
- Power Trax Lock-Right locker, part 2414-LR, for Dana 44 axles
- 27 splines, for open differentials only
- Reuses the existing carrier with no gear setup needed
- Automatic locking action with aggressive traction
- UPC 70000245790
SKU: PTX2414-LR -
-
Dana 44 Bearings and Install Kits
Omix-ADA Dana35/44 Rear Axle Bearing – 16536.31
- Rear axle bearing for Dana 35 and Dana 44 axles
- Fits 1999-2004 Grand Cherokee WJ and 1996-1998 Grand Cherokee ZJ
- Direct OE replacement with a limited five-year warranty
- Omix-Ada part number 16536.31, UPC 804314133535
SKU: OAI16536.31
About the Dana 44
The Dana 44 is a popular medium-duty axle used in Jeeps, Ford trucks and Broncos, and other 4x4s, front or rear, and it is a common base for upgrades. Variants differ by spline count, housing, and mounting, so identify your axle carefully before ordering anything. The tag on the housing, the spline count, and the vehicle application are the starting points.
Parts here span routine maintenance items like seals and bearings through full gear and locker upgrades.
Gearing and differentials
Ring and pinion sets are chosen by ratio, such as 4.10, 4.56, or 5.13, usually to compensate for larger tires. Front and rear ratios must match, and sets should be installed with a master installation kit containing bearings, shims, and seals. Gear setup requires correct pinion depth and backlash measurements.
- Lockers and spools lock both wheels together for maximum traction.
- Limited slip units share torque between wheels while allowing some difference in speed.
- Open differential parts support rebuilds of the stock design.
Shafts, hubs, and wear parts
Axle shafts must match spline count and length, and some models need ABS tone rings or particular flange designs. Hubs, spindles, and ball joints wear with miles and trail use, and seals and bearings should be replaced together to protect the new components. U-joints and yokes need to match the shaft and driveline series.
Check the axle ratio, spline count, and brake configuration before purchasing any internal parts.
Installation guidance
Axle work is safety critical. Gear setup requires special tools and experience, and incorrect setup can cause noise and failure. Use jack stands, torque fasteners to specification, fill with the correct gear oil, and break in new gears gently. Professional installation is recommended for ring and pinion and locker work. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.
Preparing for an axle project
Plan the project before tearing anything down. Identify the axle and its ratio, decide which parts to replace, and gather seals, bearings, gear oil, thread locker, and RTV or gaskets. Mark the driveshaft and carrier caps and keep parts organized.
Check axle housing straightness, tube condition, and mounting brackets. Many people upgrade axle shafts, lockers, and gears at the same time, because the housing is already open. Fill with the specified oil and drive gently for the first few hundred miles.
Spline count and axle shaft length are two of the first measurements to confirm. Dana 44 shafts come in different spline counts, and the inner and outer shafts on a front axle are different lengths on each side. Check the U-joint series, hub bolt pattern, and brake rotor mounting before choosing shafts.
Ring gear size, carrier break, and the pinion design also vary. Front and rear ring and pinion sets are not interchangeable, and a standard-rotation unit differs from a reverse-rotation unit found in some Jeep front axles. Carrier bearings and shims must be selected to suit the carrier you use.
Gear oil, additives, and limited slip friction modifiers all matter. Limited slip units often need a friction modifier, and lockers may need a particular type of oil. Check the oil level at each service, look for metal in the drain plug, and replace seals at the first sign of leaks to protect the brakes.
Related guides
- Dana 30 vs Dana 44 vs Dana 60: Which Axle Is Under Your Jeep or Truck, and When to Upgrade
- First SUV: The International Harvester Scout 80 Story
The first SUV wasn't a Jeep. See how the International Harvester Scout 80 came to be, how the Scout 800 and Scout II followed,…
- Is Your Dana 44 Vent Destroying Your Axle?
Learn how a Dana 44 axle vent works, which vent locations let water into the gear oil, and how to add a top-mounted breather…
Popular Dana 44 Axle Parts, Axles, Gears, and Modifications brands
- G2 Axle and Gear (178)
- Dana Spicer (93)
- Crown Automotive (58)
- Omix-Ada (35)
- Alloy USA (33)
- ARB 4x4 Accessories (13)
- TeraFlex (9)
- Auburn Gear (7)
- Detroit Locker (6)
- Rubicon Express (6)
- RCV Axles (4)
- Jeep (4)
Shop Dana 44 Axle Parts, Axles, Gears, and Modifications by type
- Dana 44 Axle Shafts (84)
- Dana 44 Ring and Pinion (68)
- Dana 44 Bearings and Install Kits (63)
- Dana 44 Oil Seals (56)
- Dana 44 Complete Assemblies (38)
- Dana 44 Differential Covers (31)
- Dana 44 Miscellaneous Parts (31)
- Dana 44 Hubs and Spindles (26)
- Dana 44 Lockers and Spools (26)
- Dana 44 Ball Joints (18)
- Dana 44 Drive Yokes and Flanges (13)
- Dana 44 U-Joints (9)
- Dana 44 Limited Slip Differentials and Parts (9)
- Dana 44 Open Differential Parts (7)
Dana 44 Axle Parts, Axles, Gears, and Modifications FAQ
How do I identify a Dana 44?
Look for a tag on the axle housing, a cover shape and bolt count, and the vehicle application. Spline count and ring gear diameter can be measured. Dana 44 variants differ, so verify before ordering parts.
What gear ratio should I choose?
Pick a ratio that restores performance with your tire size. Larger tires often call for numerically higher ratios, like 4.56 or 5.13, and front and rear ratios must match. Engine, transmission, and use all matter.
Do I need a master install kit?
It is strongly recommended with new gears. The kit includes bearings, seals, and shims needed to set pinion depth and backlash correctly. Reusing worn bearings can hurt gear life.
Can I install gears myself?
Only if you have the tools and experience. Setting pinion depth and backlash is precise work, and mistakes damage new gears. Many owners use a professional shop for ring and pinion installations.













