Overview
The Dana Spicer output shaft yoke nut washer, part number 30186, is a washer for output shaft yoke nuts on Model 25, 27, 30 and 44 axles and on M18, M20, 300 and Quadra-Trac transfer cases.
XJ Cherokee applications are covered in the fitment section below.
Key features
- Covers Model 25, 27, 30 and 44 axles
- Covers M18, M20, 300 and Quadra-Trac transfer cases
- Named for XJ Cherokee with nondisconnect and disconnect axles
- Suited to the axle and transfer case models named above.
Checking axle and transfer case
Washers like this one sit under the output shaft yoke nut, where they keep the nut seated and the yoke held firmly against the output shaft. A worn or missing washer can let the nut back off, which leads to vibration or a loose yoke. Inspect the washer for flattened edges or cracks whenever the yoke is removed.
Because the washer covers several axle and transfer case models, the model on your vehicle is the deciding factor. Compare the washer’s fit around the output shaft and the nut thread with the old part. On older Cherokee applications, check the axle type first, since nondisconnect and disconnect axles can use different hardware arrangements.
- Replace the output shaft yoke nut if it is worn
- Check the seal and yoke for leaks during service
- Torque the nut to the correct value for your axle
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 30186 |
| UPC | 70000006722 |
| Axle models | Model 25, 27, 30 and 44 |
| Transfer cases | M18, M20, 300 and Quadra-Trac |
| Fitment | Universal fit |
Vehicle fitment
XJ Cherokee applications are 1985-00 with a nondisconnect axle and 1984-91 with a disconnect axle. Fit is by axle model rather than by vehicle model.
Other Cherokee generations and other vehicle models should not be assumed to fit. Check your vehicle’s year, model and trim before ordering.
Installation notes
Check the axle model and transfer case before fitting, since several axle and transfer case models are covered.
What’s included
The package contains the washer. Not included: The output shaft yoke nut and other hardware are not part of this package. Check that you have them before starting.









