Overview
The 20990 is a chrome manual locking hub for 19-spline outer axle shafts, with an internal style design for wheel hubs. It is a direct fit for most 1/2 and 3/4 ton Dana 44 and GM 10 bolt axles.
The hub is all metal and built for owners who want strong performance. The zinc aluminum alloy dial takes a full nine tenths of a turn to fully engage the inner drive gear with the clutch ring. A thick internal wave spring and heavy dial detents keep it engaged.
Warn lists these hubs for a long range of trucks from the 1960s through 1997, including Chevrolet and GMC K and V-series pickups and Suburbans, Ford Bronco, F-100, F-150 and F-250 models, Dodge W-series and Ramcharger, International pickups and Travelall models, the Geo Tracker, the GMC Jimmy and the Jeep J10 and J20 trucks.
Key features
- All metal construction
- Zinc aluminum alloy dial that takes nine tenths of a turn to engage
- Thick internal wave spring and heavy dial detents
- Chrome finish with a metal knob
- Limited lifetime warranty from Warn
Before you fit manual hubs
Manual locking hubs let you disconnect the front wheels from the axle, so the front driveline is not turning during two-wheel drive use. That can reduce wear on front axle and drivetrain parts during highway driving, and it can help fuel economy on trucks driven mostly on pavement.
Before installing, check the wheel bearings, axle shafts and hub mounting surface for wear. Hubs depend on correct bearing preload, so set it properly after installation. On trucks that spend time in four-wheel drive, the lock should be fully engaged before shifting in, and released again when returning to two-wheel drive.
- Lock both hubs before engaging four-wheel drive
- Inspect seals and gaskets during routine service
- Keep the dial free of grit and grease
- Recheck bearing preload after a few miles
Specifications
| Brand | Warn |
|---|---|
| Part number | 20990 |
| UPC | 1274820990 |
| Spline | 19 splines, outer axle shaft |
| Hub style | Internal style wheel hub |
| Finish | Chrome |
| Knob material | Metal, zinc aluminum alloy dial |
| Fitment | Direct fit; fits most 1/2 and 3/4 ton Dana 44 and GM 10 bolt axles |
| Warranty | Limited lifetime |
Vehicle fitment
Warn lists these hubs for 1960s through 1997 trucks and SUVs, with the models named in the overview. The list is long and it is not limited to Jeep models.
Vehicles with full-time 4WD need a transfer case conversion, and vehicles with 3-bolt automatic hub covers need spindle nut kit part number WAR32720. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Full-time 4WD vehicles require a transfer case conversion before these hubs will work. Vehicles with 3-bolt automatic hub covers require spindle nut kit part number WAR32720.
What’s included
The chrome manual locking hub.


















