Dana 30 vs Dana 44 vs Dana 60: how to identify the axle under your Jeep or truck, what each one handles, and when…
Dana 44 Axle Parts, Axles, Gears, and Modifications
Showing 229–240 of 469 resultsSorted by popularity
-
-
-
Dana 44 Bearings and Install Kits
Crown Automotive Axle Shaft Bearing Kit – D35WJABK
- Rear axle shaft bearing kit for Dana 35 or Dana 44 axles
- Includes ring, oil seal, bearing and retainer
- Crown Automotive part number D35WJABK, UPC 848399078978
- Direct fit for the 1999-2004 Jeep Grand Cherokee (WJ)
SKU: CROD35WJABK -
Wheel Bearings
Crown Automotive Dana 44 and Model 20 Wheel Bearing – 83503064
- Rear wheel bearing for Dana 44 and Model 20 axles
- Crown Automotive part number 83503064, UPC 848399025101
- Covers Jeep CJ, Cherokee, Wagoneer, Comanche and Wrangler models from 1966 to 2018
- Direct fit in the rear position
SKU: CRO83503064 -
-
Dana 44 Oil Seals
Crown Automotive Dana 35/44 Retainer Ring Seal – 83503054
- Retainer ring seal for Dana 35 and Dana 44 rear axles.
- Fits the 1984 to 1989 Cherokee XJ, 1986 to 1989 Comanche, 1987 to 1989 Wrangler YJ and 1999 to 2004 Grand Cherokee WJ.
- Part number 83503054, UPC 848399025088.
SKU: CRO83503054 -
-
Inner Axle Seals
Crown Automotive Dana 44 Axle Shaft Inner Seal – 83501009
- Dana 44 axle shaft inner seal, 2-5/8 inch outside diameter, for the front inner position.
- Fits 1977 to 1983 Cherokee SJ, 1977 to 1990 Wagoneer SJ and related SJ-era models
- Part number 83501009, UPC 848399024203.
SKU: CRO83501009 -
Dana 44 Axle Shafts
Crown Automotive Dana 44 JK Rubicon Front Passenger Side Axle Shaft – 68017183AB
Dana 44 Axle ShaftsCrown Automotive Dana 44 JK Rubicon Front Passenger Side Axle Shaft – 68017183AB
- Front passenger side axle shaft assembly for Dana 44, 30 splines
- Includes inner shaft, outer shaft and U-joint
- For 2-door and 4-door models
- Fits 2007–2018 Jeep Wrangler JK models
- Crown Automotive part 68017183AB
SKU: CRO68017183AB -
-
Dana 44 Axle Shafts
Crown Automotive Dana 44 JK Rubicon Front Driver Side Axle Shaft – 68017180AB
- Front driver side Dana 44 axle shaft, part number 68017180AB
- Covers 2007-2018 Jeep Wrangler JK models through the JK code
- Inner shaft, outer shaft and U-joint assembly
- 30 splines; direct fit for 2-door and 4-door models
SKU: CRO68017180AB
About the Dana 44
The Dana 44 is a popular medium-duty axle used in Jeeps, Ford trucks and Broncos, and other 4x4s, front or rear, and it is a common base for upgrades. Variants differ by spline count, housing, and mounting, so identify your axle carefully before ordering anything. The tag on the housing, the spline count, and the vehicle application are the starting points.
Parts here span routine maintenance items like seals and bearings through full gear and locker upgrades.
Gearing and differentials
Ring and pinion sets are chosen by ratio, such as 4.10, 4.56, or 5.13, usually to compensate for larger tires. Front and rear ratios must match, and sets should be installed with a master installation kit containing bearings, shims, and seals. Gear setup requires correct pinion depth and backlash measurements.
- Lockers and spools lock both wheels together for maximum traction.
- Limited slip units share torque between wheels while allowing some difference in speed.
- Open differential parts support rebuilds of the stock design.
Shafts, hubs, and wear parts
Axle shafts must match spline count and length, and some models need ABS tone rings or particular flange designs. Hubs, spindles, and ball joints wear with miles and trail use, and seals and bearings should be replaced together to protect the new components. U-joints and yokes need to match the shaft and driveline series.
Check the axle ratio, spline count, and brake configuration before purchasing any internal parts.
Installation guidance
Axle work is safety critical. Gear setup requires special tools and experience, and incorrect setup can cause noise and failure. Use jack stands, torque fasteners to specification, fill with the correct gear oil, and break in new gears gently. Professional installation is recommended for ring and pinion and locker work. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.
Preparing for an axle project
Plan the project before tearing anything down. Identify the axle and its ratio, decide which parts to replace, and gather seals, bearings, gear oil, thread locker, and RTV or gaskets. Mark the driveshaft and carrier caps and keep parts organized.
Check axle housing straightness, tube condition, and mounting brackets. Many people upgrade axle shafts, lockers, and gears at the same time, because the housing is already open. Fill with the specified oil and drive gently for the first few hundred miles.
Spline count and axle shaft length are two of the first measurements to confirm. Dana 44 shafts come in different spline counts, and the inner and outer shafts on a front axle are different lengths on each side. Check the U-joint series, hub bolt pattern, and brake rotor mounting before choosing shafts.
Ring gear size, carrier break, and the pinion design also vary. Front and rear ring and pinion sets are not interchangeable, and a standard-rotation unit differs from a reverse-rotation unit found in some Jeep front axles. Carrier bearings and shims must be selected to suit the carrier you use.
Gear oil, additives, and limited slip friction modifiers all matter. Limited slip units often need a friction modifier, and lockers may need a particular type of oil. Check the oil level at each service, look for metal in the drain plug, and replace seals at the first sign of leaks to protect the brakes.
Related guides
- Dana 30 vs Dana 44 vs Dana 60: Which Axle Is Under Your Jeep or Truck, and When to Upgrade
- First SUV: The International Harvester Scout 80 Story
The first SUV wasn't a Jeep. See how the International Harvester Scout 80 came to be, how the Scout 800 and Scout II followed,…
- Is Your Dana 44 Vent Destroying Your Axle?
Learn how a Dana 44 axle vent works, which vent locations let water into the gear oil, and how to add a top-mounted breather…
Popular Dana 44 Axle Parts, Axles, Gears, and Modifications brands
- G2 Axle and Gear (178)
- Dana Spicer (93)
- Crown Automotive (58)
- Omix-Ada (35)
- Alloy USA (33)
- ARB 4x4 Accessories (13)
- TeraFlex (9)
- Auburn Gear (7)
- Detroit Locker (6)
- Rubicon Express (6)
- Jeep (4)
- Warn (4)
Shop Dana 44 Axle Parts, Axles, Gears, and Modifications by type
- Dana 44 Axle Shafts (84)
- Dana 44 Ring and Pinion (68)
- Dana 44 Bearings and Install Kits (63)
- Dana 44 Oil Seals (56)
- Dana 44 Complete Assemblies (38)
- Dana 44 Differential Covers (31)
- Dana 44 Miscellaneous Parts (31)
- Dana 44 Hubs and Spindles (26)
- Dana 44 Lockers and Spools (26)
- Dana 44 Ball Joints (18)
- Dana 44 Drive Yokes and Flanges (13)
- Dana 44 U-Joints (9)
- Dana 44 Limited Slip Differentials and Parts (9)
- Dana 44 Open Differential Parts (7)
Dana 44 Axle Parts, Axles, Gears, and Modifications FAQ
How do I identify a Dana 44?
Look for a tag on the axle housing, a cover shape and bolt count, and the vehicle application. Spline count and ring gear diameter can be measured. Dana 44 variants differ, so verify before ordering parts.
What gear ratio should I choose?
Pick a ratio that restores performance with your tire size. Larger tires often call for numerically higher ratios, like 4.56 or 5.13, and front and rear ratios must match. Engine, transmission, and use all matter.
Do I need a master install kit?
It is strongly recommended with new gears. The kit includes bearings, seals, and shims needed to set pinion depth and backlash correctly. Reusing worn bearings can hurt gear life.
Can I install gears myself?
Only if you have the tools and experience. Setting pinion depth and backlash is precise work, and mistakes damage new gears. Many owners use a professional shop for ring and pinion installations.












