Overview
The Dana Spicer Dana 30/44 Pinion Head Slinger, part number 30764, is a pinion slinger for Dana 30 and Dana 44 axles. It installs behind the pinion head.
The slinger throws oil away from the inner pinion bearing, so the oil can return to the differential cavity. Dana Spicer labels the part Universal Fit, but the title ties it to the Dana 30 and Dana 44 pinion heads, so match it to your axle before installing.
Key features
- Installs behind the pinion head
- Slings oil away from the inner pinion bearing
- Returns oil to the differential cavity
- Made for the Dana 30 and Dana 44 pinion heads
Pinion seal and oil flow
The pinion is the gear that drives the ring gear, and its inner bearing sits inside the carrier where gear oil is splashed around. A slinger helps push oil back out of the bearing area so the bearing stays lubricated and the seal sees less pressure. Sealing and lubrication are linked, so a slinger that is bent, cracked or missing can let oil build up at the pinion seal.
When a pinion seal is replaced, check the slinger position and clean the surface it sits against. Tighten the pinion nut only as far as the axle service procedure requires. Look for worn bearings, grooves in the pinion yoke and oil seepage at the carrier nose. Replacing the seal, slinger and yoke together is a common choice when the pinion has already been apart.
Keep the carrier filled to the correct gear oil level after any pinion work. A slinger that sits square and runs clear of the seal helps keep oil where it belongs over many miles of use.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 30764 |
| UPC | 70000006723 |
| Part type | Pinion head slinger |
| Axle | Dana 30 and Dana 44 |
| Mounting | Behind the pinion head |
| Fitment label | Universal Fit |
Vehicle fitment
It is made for Dana 30 and Dana 44 pinion heads. Confirm fit for your vehicle’s year, model and trim before ordering.
Check the pinion head on your axle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The slinger installs behind the pinion head. No other installation steps are given.
What’s included
Only the slinger is described.








