Overview
The Warn Dana 44 Black Differential Skid Plate, part number 65447, protects the differential on Dana 44 axles. It fits the front and rear locations and Dana 44 JK axles. It is angled to fit tightly against the cover and add structural rigidity, so the cover is less exposed to trail hits.
The plate fits both high and standard pinion covers and gives full protective coverage. Its closed shape slides over rocks and stumps without snagging or hanging up. It is made from 3/16-inch steel in black powder coat or stainless steel.
Key features
- Fits high and standard pinion covers
- Angled design for a tight fit and structural rigidity
- Closed-shape profile slides over objects without hanging up
- 3/16-inch steel construction
- Choice of black powder coat or stainless steel finish
Differential guard maintenance
A differential skid plate protects the cover, which holds the gear oil and sits low on the axle where it is most exposed. Over time, repeated rock strikes can bend a cover flange or loosen the fasteners, so the plate is worth checking as part of routine underbody inspections. A bent flange can weep fluid at the gasket, so look for fresh oil or dirt around the seal after a hard day on the trail.
Access to the drain and fill plugs can be limited by a guard, so plan fluid service before the plate is bolted on. Keep the finish intact, especially on black powder coat, because bare spots invite rust at the mounting points. Stainless versions avoid that issue but still need the bolts checked regularly.
- Check the cover gasket for seepage after rock strikes
- Inspect guard fasteners before long trips
- Touch up scratches on black powder coat
Specifications
| Brand | Warn |
|---|---|
| Part number | 65447 |
| UPC | 1274865447 |
| Material | 3/16-inch steel |
| Finish | Black powder coat or stainless steel |
| Axle location | Front or rear |
| Axle type | Dana 44 and Dana 44 JK |
Vehicle fitment
It fits Dana 44 and Dana 44 JK axles in the front and rear locations. Fit is by axle type rather than by vehicle make, model or year.
The plate is a differential cover guard, not a vehicle-specific part, so check that your axle is a Dana 44 before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate is a bolt-on guard for the differential cover, and the pinion cover shape determines how it sits. It fits high and standard pinion covers, so measure your pinion cover before installing.
What’s included
One differential skid plate in the finish you select. Check the package contents against your installation before starting.


















