Rugged Ridge
Showing 193–240 of 987 resultsSorted by popularity
-
-
-
Steering Upgrades and Drag Links
Rugged Ridge Inverted Drag Link – 18205.26
- Rugged Ridge 18205.26 inverted drag link for 2007–2018 Jeep Wrangler JK
- Flips over the knuckle to increase ground clearance and reduce bumpsteer
- Fits 2-door and 4-door models
- Requires a 13/17 inch drill bit for installation
SKU: RUG18205.26 -
Steering Column Covers
Rugged Ridge Steering Column Cover (Chrome) – 18090.01
- Fits 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler per the manufacturer list
- Chrome plastic two-piece steering column cover
- Bolt-on direct fit to factory mounting holes, no drilling required
- All necessary hardware included
- Rugged Ridge part number 18090.01
SKU: RUG18090.01 -
Steering Kit
Rugged Ridge Heavy-Duty Steering Kit with Damper – 18050.88
- Rugged Ridge heavy-duty steering kit with damper, part 18050.88
- Bolt-on kit with 7/8 inch heavy-duty rod ends
- Designed for vehicles with 2 to 4 inches of lift
- Fits XJ, ZJ, LJ Unlimited and TJ Wrangler models, front position
SKU: RUG18050.88 -
Steering Kit
Rugged Ridge Heavy-Duty Tie Rod/Drag Link Kit – 18050.83
- Complete drag link and tie rod kit, part number 18050.83
- 1.25 inch OD SAE steel tubes with 1/4 inch wall
- Factory tapered ends, no modification required
- Includes dust shields, castle nuts, cotter pins, jamb nuts and zerk fittings
SKU: RUG18050.83 -
Steering Kit
Rugged Ridge Heavy-Duty Tie Rod/Drag Link Kit – 18050.82
- Rugged Ridge heavy-duty tie rod and drag link kit, part 18050.82
- Fits 1984 to 2001 Jeep Cherokee (XJ), 1993 to 1998 Grand Cherokee (ZJ), 2004 to 2006 Wrangler Unlimited (LJ) and 1997 to 2006 Wrangler (TJ)
- Includes 4 tie rod ends, 2 rods and steering damper bracket
- Listed position: outer; not for right hand drive
SKU: RUG18050.82 -
-
-
-
Tie Rod
Rugged Ridge Heavy-Duty Tie Rods – 18050.54
- Rugged Ridge 18050.54 heavy-duty tie rods for narrow track axles
- 1-1/4 inch ID steel tubing with a 1/4 in. wall, true DOM with no seams or welds
- Includes 2 tie rod ends with standard tapered ends for stock knuckles
- Fits 1972-1983 Jeep CJ5, 1972-1975 CJ6, 1976-1981 CJ7 and 1981 Scrambler
SKU: RUG18050.54 -
Steering Kit
Rugged Ridge Heavy Duty Tie Rod End with Drag Link Connection – 18043.27
- Spare heavy duty tie rod end with drag link connection, Rugged Ridge part 18043.27
- 7/8 inch shaft with left hand thread
- Listed position: front right
- Fits Jeep Cherokee XJ, Grand Cherokee ZJ, Wrangler Unlimited LJ and Wrangler TJ
SKU: RUG18043.27 -
-
-
-
Skid Plates
Rugged Ridge Jeep Wrangler Engine and Transmission Skid Plate (Black) – 18003.51
- Engine and transmission skid for lifted Jeep JK with 3.6L engine
- 3/16-inch black powder coated steel with rust resistant E-coat
- Protects engine and transmission on Dana 30 and Dana 44 front axles
- 2.5-inch lift recommended to prevent driveshaft rubbing
- Bolt-on at existing frame mounting locations
SKU: RUG18003.51 -
Skid Plates
Evaporative Canister Skid Plate
- Fits 2012 to 2016 Jeep Wrangler JK, Rubicon and Unlimited
- For 2-door and 4-door models
- 3/16-inch black powder-coated steel
- Mounts to existing body holes with factory hardware
- Moves impact loads away from the evaporative canister to the frame
SKU: RUG18003.42 -
Skid Plates
Rugged Ridge Gas Tank Skid Plate (Black) – 18003.21
- Fits 1987 to 1995 Jeep Wrangler YJ models
- 3/16-inch thick steel with an E-coat and black powder coat
- Works with 15- and 20-gallon gas tanks
- Bolts to existing mounting locations with no cutting or drilling
- Replaces the factory fuel tank skid plate
SKU: RUG18003.21 -
Skid Plates
Rugged Ridge Steering Box Skid Plate (Black) – 18003.12
- Steering box skid plate in 3/16-inch powder coated steel with rust resistant E-coat
- Low profile design to keep ground clearance high
- Fits 2004-2006 Jeep Wrangler LJ and 1997-2006 Wrangler TJ
- Installs at existing mounting locations with factory hardware
SKU: RUG18003.12 -
-
Throttle Body Spacers
Rugged Ridge Throttle Body Spacer (Anodized) – 17755.02
- Rugged Ridge throttle body spacer, part number 17755.02
- Raises the throttle body 1/2 inch above the intake manifold
- Solid aluminum with black anodized finish and large bore
- Bolt-on fit for 3.8L engines
- Not legal for use in California or other CARB-standard states
SKU: RUG17755.02 -
Throttle Body Spacers
Rugged Ridge Throttle Body Spacer (Anodized) – 17755.01
- Fits 1991 to 2001 Cherokee (XJ), 1997 to 2006 Wrangler (TJ) and 1991 to 1995 Wrangler (YJ)
- Raises the throttle body 1 inch above the intake manifold
- Solid aluminum with black anodized finish
- Bolt-on install with hand tools; includes mounting hardware, gaskets and spacers
SKU: RUG17755.01 -
Air Filters
Rugged Ridge Air Filter – 17753.02
- Rugged Ridge 17753.02 dry conical air filter with a 70 mm flange and 270 mm length
- Fits the 1991–2001 Jeep Cherokee (XJ) and 2003–2006 Jeep Wrangler (TJ) SE
- Washable, reusable dry design that never needs oiling
- Described by Rugged Ridge as a direct replacement for its cold air kit filter
SKU: RUG17753.02 -
-
Air Intake Kits
Rugged Ridge Cold Air Intake – 17750.07
- Fits 2012–2018 Jeep Wrangler (JK) models
- Polished 6063 aluminum mandrel bent intake tube with a conical dry panel filter
- Partial enclosure filter housing with a cold air intake design
- No-drill bolt-on installation with simple hand tools
- Black powder coated heat shield; inlet tube included
SKU: RUG17750.07 -
Air Intake Kits
Rugged Ridge Cold Air Intake – 17750.03
- Confirm fit for your vehicle’s year, model and trim before ordering
- Polished 6063 aluminum mandrel bent intake tube with a conical dry panel filter
- Bolt-on, no-drill installation with simple hand tools
- Black powder coated heat shield; inlet tube included
- Claimed gains: fuel economy up to 10%, up to 10HP and 12 ft lbs of torque
SKU: RUG17750.03 -
Air Intake Kits
Rugged Ridge Cold Air Intake – 17750.01
- Fits the 1997–2006 Jeep Wrangler (TJ) per the manufacturer fitment list
- Rugged Ridge part number 17750.01, UPC 804314217129
- Polished 6063 aluminum mandrel bent intake tube with high-flow conical dry panel filter
- Black powder coated heat shield; inlet tube included
- Bolt-on, no-drill installation with simple hand tools
SKU: RUG17750.01 -
Trailer Wire Harness
Rugged Ridge Trailer Wiring Harness – 17275.01
- Rugged Ridge 17275.01 receiver hitch for 2007–2018 Jeep Wrangler JK
- Bolts to factory mounting points with a cutout for the factory wiring harness
- With weight distributing equipment: 3,500-lb tow rating, 350-lb tongue weight
- Without it: 2000-lb tow rating, 200-lb tongue weight, 2 inch opening
SKU: RUG17275.01 -
-
Switch Pods
Rugged Ridge A-Pillar Pod Kit
- 4-switch A-pillar pod kit, part number 17235.98
- Includes pod 17235.58, 3 2-position marine style rocker switches and a USB connector
- Rocker switches in red, amber and blue
- Textured molded finish matches the factory pillar cover
- UPC 804314288044; vehicle fitment not listed
SKU: RUG17235.98 -
Switch Pods
Rugged Ridge A-Pillar Switch Pod and Rocker Switch – 17235.96
- Driver-side A-pillar switch pod, part number 17235.96
- Premolded cutouts for up to four aftermarket switches
- Textured molded finish matches the factory pillar cover
- Available for both LHD and RHD Jeeps.
- UPC 804314238056; vehicle years and models not listed
SKU: RUG17235.96 -
Switch Pods
Rugged Ridge A-Pillar Pod Kit – 17235.95
- Right-side A-pillar pod kit, part number 17235.95
- Includes the pod, three 2-position rocker switches and a Dual USB Port switch
- Mounts up to four aftermarket switches
- Available for both LHD and RHD Jeeps.
- UPC 804314299835; vehicle years and models not listed
SKU: RUG17235.95 -
Switch Pods
Rugged Ridge A-Pillar Pod Kit
- 4-switch A-pillar pod kit, part number 17235.88
- Includes the 17235.56 pod, 3 2-position marine style rocker switches and a USB connector switch
- Rocker switches in red, amber and blue
- Textured molded finish matches the factory pillar cover
- UPC 804314288037; vehicle fitment not listed
SKU: RUG17235.88 -
Switch Pods
Rugged Ridge A-Pillar Switch Pod and Rocker Switch – 17235.86
- Mounts up to four aftermarket switches on the driver-side A-pillar
- Premolded cutouts; no cutting or modifications are described
- Textured molded finish matches the factory plastic pillar cover
- Part number 17235.86, UPC 80431423299
- Vehicle fitment not listed; confirm your vehicle before ordering
SKU: RUG17235.86 -
Switch Pods
Rugged Ridge Center Console Switch Panel and Rocker Switch – 17235.85
- Center console switch plate for 2007-2010 Jeep Wrangler with automatic transmission
- Replaces the filler plate and holds up to four switches
- Available as a bundle with four multi color rocker switches
- Limited 3 year warranty
SKU: RUG17235.85 -
Toggle Switch Panel
Lower Switch Panel Kit
- Replaces the lower center dash panel on 2011 to 2017 Jeep Wrangler JK
- Includes four 2-position rocker switches in amber, green, red and blue
- Dual USB charging port included
- Impact-resistant thermoplastic that matches the factory dash
- Fits manual and automatic transmissions
SKU: RUG17235.84 -
-
Switch Pods
Etched Lower Switch Panel Kit
- Center console switch pod for 2007-2010 Jeep Wrangler JK models with automatic transmissions
- Direct replacement for the original equipment center console filler plate
- Five 2-position laser-etched rocker switches
- Switch labels: Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights and Off-Road Lights
- Rugged Ridge part number 17235.72
SKU: RUG17235.72 -
-
-















































