Overview
The Rugged Ridge 17750.07 is a cold air intake kit for the 2012–2018 Jeep Wrangler (JK). It replaces the factory airbox with a polished 6063 aluminum mandrel bent intake tube feeding a high-flow conical dry panel filter, so the engine draws cooler air.
A black powder coated heat shield sits between the filter and engine heat, dirt and debris. The kit can improve fuel economy up to 10% and add up to 10HP and 12 ft lbs of torque. The dry panel filter never needs oiling, which keeps oil away from the airflow sensor, and the filter housing is a partial enclosure.
Key features
- Polished mandrel bent 6063 aluminum intake tube
- Conical dry panel filter that never needs oiling
- Partial enclosure filter housing
- Black powder coated heat shield
- No-drill bolt-on installation with simple hand tools
- 50 State Legal
Care for a dry panel filter
A dry panel filter is cleaned and replaced rather than oiled, so the service routine is simple. Pull the filter at regular intervals, tap loose dirt out of the pleats, and blow from the inside out with low pressure air if the element is still in good shape. Replace it once the media is torn or the pleats stay dark after cleaning. Check that the seal around the filter sits flat before reinstalling the housing, since a gap lets unfiltered air reach the engine.
Intake changes also affect the air sensor side of the system. Keep the tube clear of mud and water when you drive through deep puddles, and inspect the couplings after rough trail use because a loose clamp can cause a vacuum leak and a rough idle. Recheck the bolts and the heat shield fasteners after the first few trail runs, since vibration can loosen them over time.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17750.07 |
| UPC | 804314245214 |
| Tube material | Polished 6063 aluminum |
| Tube construction | Mandrel bent |
| Filter type | Conical dry panel (part details list filter type as oil) |
| Filter housing | Partial enclosure |
| Intake type | Cold air |
| Heat shield | Black powder coated |
| Inlet tube | Included |
| Claimed gains | Fuel economy up to 10%; up to 10HP; up to 12 ft lbs of torque |
Vehicle fitment
It fits the 2012–2018 Jeep Wrangler (JK), including the 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, plus the Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S versions.
Wrangler years before 2012 and the JL generation are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on with simple hand tools and no drilling.
What’s included
The kit includes the polished aluminum intake tube, a conical dry panel filter and the black powder coated heat shield, with the inlet tube included.









