Overview
The Rugged Ridge 18205.26 is an inverted drag link for lifted 2007–2018 Jeep Wrangler JK models, designed to flip over the knuckle for more ground clearance and less bumpsteer.
The redesigned link sits inverted, flipped up over the knuckle. This placement adds ground clearance and reduces bumpsteer on a lifted Wrangler, and it may reduce the need for a drop pitman arm.
Key features
- Inverted design that sits over the knuckle
- Increases ground clearance on lifted Wranglers
- Reduces bumpsteer on lifted Wranglers
- May reduce the need for a drop pitman arm
- Front position, direct fit for listed JK models
Steering geometry on lifts
Lifting a Jeep changes the angle of the steering linkage, and that change can add bumpsteer as the suspension travels. A drag link that sits in a different position relative to the knuckle helps keep the steering arms working in a more even arc. Choose parts for the lift height you run, and check that the link has room to move without contacting the frame, the track bar or the tire.
Steering geometry is a system, so the drag link, tie rods and track bar should be looked at together. A link that is set up correctly still needs sound joints and tight fasteners to hold its position on rough trails. Review the whole steering setup after any change in ride height.
- Check the ends for play at each service
- Confirm clearance at full steering lock
- Inspect the track bar and its mounts
- Recheck bolts after the first few trail runs
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18205.26 |
| UPC | 804314235789 |
| Position | Front |
| Design | Inverted, flipped up over the knuckle |
| Body style | 2-door and 4-door models |
| Drill bit required | 13/17 inch |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, plus the Unlimited versions and X trims. Other Wrangler generations, including the TJ and JL, are not included, so confirm fit for your body style and trim.
Wrangler generations other than the JK, including the TJ and JL, are not in this list. Compare your year, body style and trim with the listed trims before installing.
Installation notes
Installation requires drilling with a 13/17 inch drill bit. Have that tool ready before positioning the link over the knuckle.
What’s included
Check the package contents against your installation before starting. The 13/17 inch drill bit needed for installation is a separate tool.









