Overview
The Rugged Ridge 18050.55 is a heavy-duty front drag link set for wide track axles. It includes two tie rod ends and fits 1982–1986 Jeep CJ7 and 1982–1985 Jeep Scrambler models.
It is a bolt-on way to keep tie rods from bending when running larger tires. The tubing is 1-1/4 inch ID steel, cold rolled and pierced and drawn through dies to a 1/4 in. wall thickness. It is seamless DOM tubing with no welds.
Key features
- Bolt-on design meant to help prevent bent tie rods with larger tires
- Seamless DOM steel tubing with a 1-1/4 inch ID
- 7/8 inch rod ends with standard tapered ends for stock knuckles
- The rod ends provide one ton of strength without knuckle modifications.
- Includes two tie rod ends
Choosing the right setup
Tie rods and drag links take the load when the front wheels hit a bump or a rock, and larger tires make that load heavier because they add leverage on the steering arms. Fitting a stronger link is one way to protect the thinner stock tie rods, but it works best when the rest of the steering system is in good shape. Before buying, measure your axle track width and confirm the tire size you plan to run.
After installation, inspect the joints at each tire rotation. Look for play in the rod ends, cracks near the tube ends, and any sign that the link has moved in its mount. Alignment should be checked after any steering linkage change, because toe settings can shift during fitting and the first few miles of driving.
- Check rod end threads and jam nuts after the first trail runs
- Inspect the tie rod ends for grease leaks or play
- Recheck toe after tire size or linkage changes
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18050.55 |
| UPC | 804314123727 |
| Position | Front |
| Tube type | DOM steel, cold rolled and drawn, no seams or welds |
| Tube inside diameter | 1-1/4 inch |
| Tube wall thickness | 1/4 in. |
| Rod end size | 7/8 inch, standard tapered ends |
| Strength rating | One ton |
| Axle type | Wide track axles |
| Included | 2 tie rod ends |
Vehicle fitment
It fits 1982–1986 Jeep CJ7 models in Base, Laredo, Limited and Renegade trims, and 1982–1985 Jeep Scrambler models in Base, Laredo, Renegade, SL and SR trims.
The 1976–1981 CJ7 and the CJ5 are not in this list. Confirm the model, year and axle track width against this list before installing the set.
Installation notes
It bolts on with no drilling or welding. The rod ends are tapered, so use the tapered fit the stock knuckles require.
What’s included
The set includes two tie rod ends.












