Overview
The Rugged Ridge A-Pillar Pod Kit, part number 17235.95, is a right-side A-pillar switch pod kit for mounting up to four aftermarket switches. The pod has premolded cutouts placed in an easy reach location on the right side A-pillar, clear of the shifter handle, so accessory switches can be added without cutting.
The kit includes an A-pillar switch pod, three 2-position rocker switches and a Dual USB Port switch. It is offered for both left-hand-drive (LHD) and right-hand-drive (RHD) Jeeps. The textured molded finish matches the factory plastic A-pillar cover it replaces.
Key features
- Premolded cutouts for up to four aftermarket switches
- Right-side A-pillar placement, clear of the shifter handle
- Kit includes pod, three 2-position rocker switches and a Dual USB Port switch
- Textured molded finish matching the factory A-pillar cover
- Offered for both LHD and RHD Jeeps
Wiring accessory switches
Accessory switches on a pillar pod run on their own circuits, separate from the factory wiring. Before mounting anything, decide which functions you want, check each switch’s rating, and map a fused feed for each one. Route cable along existing harness paths where possible and keep it clear of the steering column, pedals and any airbag components in the pillar area.
A pod like this works best when the switches are sized for the loads they control. Lighted rockers draw little current, while a USB charging port needs a feed that can handle a phone or tablet. Group related switches so the labels make sense from the driver’s seat, and leave slack in the wiring so the pod can be removed later for service.
- Confirm each switch’s voltage and amp rating
- Fuse every accessory circuit near its power source
- Keep wiring away from moving parts
- Test each switch before final trim is fitted
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17235.95 |
| UPC | 804314299835 |
| Mounting location | Right side A-pillar |
| Switch capacity | Up to four aftermarket switches |
| Kit contents | A-pillar switch pod, three 2-position rocker switches, Dual USB Port switch |
| Drive configuration | LHD and RHD Jeeps |
| Finish | Textured molded |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The kit is offered for LHD and RHD Jeeps.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pod snaps into place with no drilling or cutting. Switches added to the pod need their own wiring, so plan the power feed and fusing before installation.
What’s included
The kit includes an A-pillar switch pod, three 2-position rocker switches and a Dual USB Port switch.
Not included: Additional accessory switches are not part of this kit.












