Overview
The Rugged Ridge 18006.54 is a 3 inch drop pitman arm for the 1984–2000 Jeep Cherokee (XJ), the 1993–1998 Grand Cherokee (ZJ) and the 1999–2000 Grand Cherokee (WJ), and it fits only power steering boxes.
A drop pitman arm like this one reduces the angle of the drag link and the bumpsteer that appears when a suspension lift is installed. It is meant for lifted vehicles and provides a 3 inch drop.
The restriction to power steering boxes is worth noting for Cherokee and Grand Cherokee owners, since Jeep used different steering hardware across these years and models. The arm is a direct fit within the vehicles on the list.
The XJ fits the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. The WJ fits the Laredo and Limited trims only. The ZJ fits the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
Key features
- 3 inch amount of drop
- Fits only power steering boxes
- Made for lifted vehicles
- Reduces drag link angle.
- Reduces bumpsteer created by a suspension lift, as Rugged Ridge states
- Direct fit
- Covers XJ, ZJ and WJ Jeeps
Lifted steering geometry
Raising a Jeep changes the angle of the steering linkage, and that change can cause bumpsteer, where the front wheels toe in or out as the suspension moves. A drop pitman arm lowers the steering linkage to bring the drag link closer to level. This keeps the steering feel more consistent over bumps and reduces the stress on the tie rods and joints.
Because the arm changes the geometry, it is worth looking at the rest of the steering system at the same time. Check the drag link ends, tie rod ends and steering stabilizer for wear, and make sure the power steering box and pitman arm are tight and free of leaks. A front alignment is usually needed after this kind of change.
- Check drag link and tie rod ends for play
- Look for leaks at the power steering box
- Confirm the front alignment after installation
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18006.54 |
| UPC | 804314166007 |
| Product type | Drop pitman arm |
| Amount of drop | 3 inches |
| Fit type | Direct fit |
| Steering type | Power steering boxes only |
| Intended use | Lifted vehicles |
Vehicle fitment
The 18006.54 fits three Jeep models: the 1984 to 2000 Cherokee (XJ), the 1993 to 1998 Grand Cherokee (ZJ) and the 1999 to 2000 Grand Cherokee (WJ). Year ranges and trims are below.
- 1984–2000 Jeep Cherokee (XJ) (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport)
- 1999–2000 Jeep Grand Cherokee (WJ) (Laredo, Limited)
- 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi)
The WJ covers 1999 to 2000 only, and the 2001 Cherokee (XJ) is not covered. Wrangler models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The arm fits only power steering boxes, so confirm the box before starting. No torque values or procedure are given here, so follow the included instructions and have a qualified technician check steering and drag link angle on the lifted vehicle.
What’s included
One drop pitman arm.
















