Overview
The Rugged Ridge 17755.01 is a black anodized solid aluminum throttle body spacer for 2.5L and 4.0L Jeep engines. It fits 1991 to 2001 Cherokee (XJ), 1997 to 2006 Wrangler (TJ) and 1991 to 1995 Wrangler (YJ) models. It raises the throttle body 1 inch above the intake manifold. The extra space draws in colder, denser air, and the large bore lets the engine take in a greater volume of air.
This part is not legal for sale or use in California or anywhere CARB rules apply. It is designed for racing or non-highway use only. Check local rules before fitting it to any road-going Jeep.
Key features
- Solid aluminum construction
- Black anodized finish
- Raises the throttle body 1 inch above the intake manifold
- Large bore design for greater air volume
- Bolt-on fit for 2.5L and 4.0L engines
- No-drill installation with simple hand tools
Airflow and throttle response
A throttle body spacer moves the throttle body up off the intake manifold, which changes the path between the throttle plate and the intake runners. Because the throttle body sits higher, the throttle cable or linkage geometry shifts slightly, so check that the pedal returns fully and the linkage moves smoothly through its range.
Gasket surfaces and intake hoses are the usual leak points after this kind of change. Inspect each connection for cracks, loose clamps and gaps, and listen for hissing with the engine running. Vacuum leaks often show up as rough idle, so recheck those first if idle changes.
Hardware can loosen as the engine heats and cools. Recheck the bolts after the first few drives and again at regular service. Keep the throttle body clean when you have it off, since carbon buildup can affect idle.
- Check throttle linkage travel after fitting
- Inspect intake clamps and hoses for leaks
- Recheck bolts after the first few drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17755.01 |
| UPC | 804314217334 |
| Finish | Black anodized |
| Material | Solid aluminum |
| Bore | Large, smooth |
| Spacer height | 1 inch |
| Engines | 2.5L and 4.0L |
| Fitment type | Direct fit |
| Included | Mounting hardware, gaskets and spacers |
Vehicle fitment
The spacer fits 1991 to 2001 Jeep Cherokee (XJ) in several trims, 1997 to 2006 Jeep Wrangler (TJ) and 1991 to 1995 Jeep Wrangler (YJ). Confirm fit for your vehicle’s year, model and trim before ordering.
The Jeep Wrangler (LJ), Comanche and Grand Cherokee are not on the list, and neither is the Wrangler (JK). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacer installs with the included mounting hardware, gaskets and spacers using simple hand tools, with no drilling. Because it is labeled for racing or non-highway use, weigh that label before fitting it to a vehicle used on public roads.
What’s included
Mounting hardware, gaskets and spacers.
Not included: No other parts are named.












