Overview
The Rugged Ridge Lower Switch Panel Kit, part number 17235.84, is a replacement lower center dash panel for 2011 to 2017 Jeep Wrangler models. It fits regardless of transmission type, manual or automatic, and it turns the lower dash into a bank of four rocker switches.
The panel is molded from impact-resistant thermoplastic that matches the color and grain of the factory dash. Each kit includes four 2-position rocker switches in amber, green, red and blue, plus a dual USB charging port. The switches are positioned for easy reach while keeping the factory appearance of a JK interior.
Key features
- Replaces the lower center dash panel
- Four 2-position rocker switches in amber, green, red and blue
- Dual USB charging port
- Impact-resistant thermoplastic matched to the factory dash color and grain
- Ergonomic switch placement for easy access
- Works with manual and automatic transmissions
Installing a dash panel kit
Installing a replacement lower dash panel is mostly careful removal and labeling. Before pulling the factory panel, disconnect the battery and mark each wire so the switches can be matched to their circuits later. The new panel holds four rocker switches and a dual USB charging port, so take time to route the harness so nothing is pinched when the panel is set back into the dash.
Testing before reassembly saves time. Connect the wiring and check every switch and the USB port while the dash is still open. Confirm that each switch turns on the correct circuit and that the USB port charges a device. Then secure the panel evenly so the switch faces sit flush with the surrounding trim.
- Disconnect the battery before starting
- Label each wire before removing the old panel
- Test every switch and the USB port before reassembly
- Seat the panel evenly against the surrounding trim
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17235.84 |
| UPC | 804314293994 |
| Mounting type | Dash |
| Switch count | 4 two-position rocker switches |
| Switch colors | Amber, green, red, blue |
| Charging port | Dual USB |
| Panel material | Impact-resistant thermoplastic |
Vehicle fitment
The Lower Switch Panel Kit is written for the 2011 to 2017 Jeep Wrangler (JK), which Rugged Ridge says works regardless of transmission. It replaces the lower center dash panel, so the kit is specific to the JK dash.
It is designed for the 2011 to 2017 JK dash. For other years or Jeep models, confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces the factory lower center dash panel, so the original panel comes out before the new panel goes in. The switches are placed for easy access and smooth operation.
What’s included
The kit includes the lower switch panel, four 2-position rocker switches in amber, green, red and blue, and the dual USB charging port.


















